Acerinox SA

Acerinox SA

8.57
USD
-0.27
(-3.05%)
0.36EPS
31.23P/E
4.91BMarket Cap
Feb 26Next Earn

Q3 FY2026 · Earnings Call TranscriptOctober 30, 2026

Borja Riestra Marín

Good morning to you all and welcome to the third quarter 2026 results presentation. Before we begin, we would like to thank everyone for the messages of concern following the train accident two days ago.

While that route is commonly used by our staff traveling to the factory, fortunately, no Acerinox employees were injured. Our hearts go out to those affected, and we extend our deepest condolences and support to the victims and their families.

Q3 has been a strong quarter for Acerinox. As a group, we have demonstrated our strength in a complex market situation, and as we will explain during this call, we continue to prioritize our working capital and solid cash generation.

During this call, we will hear from our Chief Corporate Officer, Miguel Ferrandis, Esther Camós, our Chief Financial Officer, and Carlos Lora-Tamayo, our IR, Communication and Reporting Director, who will explain our Q3 results and provide an outlook for Q4. Before we start with this presentation, let me remind you that this conference is being broadcast on our website acerinox.com.

Now, I will hand you over to our Chief Corporate Officer, Miguel Ferrandis. Miguel, please, go ahead.

Miguel Ferrandis

Thank you, Borja. When preparing this results presentation, trying to find a word, probably what comes more to my mind is the word of pride.

We are presenting a very remarkable figures in the current days with challenges all over the world and with a highly complex environment. We are not yet reaching the levels of consumption almost in every area of the pre-COVID time, but what appears evident in this results achieved in the third quarter and in these nine months is that we are capitalizing opportunities where they are and when they come, and we are taking the best of that.

If you see the figures appearing in this highlights, you can realize that the figure of sales, €1.6 billion for the third quarter, is very similar to that one of the previous quarter, but having said that, we have improved our EBITDA a 13%, reaching this figure of €199 million. We like to be predictable when we forecast the outlook in the results presentation of the Q2, we announced that we shall be slightly above and we shall be a 13%, 1-3, above the figure of the second quarter.

When we go to the nine months figure, with this €4.5 billion of sales, just 2% above the sales of the first nine months of last year, our EBITDA has gone up to €470 million, and this means a 46% increase in EBITDA, with 2% increase in sales, 46% increase in EBITDA. This demonstrates what we are trying to explain today of how we are able to capitalize the opportunities when they come, and this is as a consequence of our consistent strategy and the evidence that that strategy is fruitful.

Our operating cash flow is slightly negative for the quarter, is slightly positive for the nine months. This is obviously driven by the working capital.

Our working capital is running normally in parallel of our performance, and the strong improvement that we are having is obviously at the end having the consequence of the increasing working capital in most of the year up to now, in the three quarters. This normally shall be strongly reduced as or neutralize as you normally know in the fourth quarter.

It's true that the figure of the working capital at September combined with the strong CapEx programs in which we are involved, combined with the semiannual dividend payment that has been taking place during the quarter, has taking our debt to the peak in the year of 1.5 that at the end shall be reduced in the fourth quarter mostly as a consequence as the expected working capital reduction. These are the main highlights for today's results presentation.

In the following slide, we are showing the gradual improvement that we are realizing quarter after quarter. This is the reported EBITDA of the last three years, and at the end, what is clearly more easy to realize is the impressive track we are experiencing during year 2026.

An outsider of the company could consider that this is as a consequence of a cycle, several tailwinds that are benefiting us everywhere, and by far, this is not the case. This is not that we are entering in a new cycle that all the circumstances and all the markets are booming, not by far.

At the end, we still are seeing a low demand everywhere, some specific sectors still are depressed. In addition, we are experiencing strong increase in energy costs.

There is a huge uncertainties almost everywhere. As we say before, the strategy, the diversification, the continuous improvement in efficiency are allowing us to experience this strong recovery, reaching figures in the third quarter of almost €200 million as a quarterly figure with a margin EBITDA of 12.5%.

This is coming, as I said before, taking the opportunities where they are, mostly of taking the good momentum that the specific sectors are experiencing in the States, combined with the turnaround that we are making in Acerinox Europa. At the end, this subsidiary that in our case has been loss-making for the last years, as you all know, we are gradually improving it.

We have reached almost break-even at EBITDA level, we mentioned it in June. We are still almost in break-even.

At the end, obviously, the energy costs in the third quarter have improved, but we are reaching this almost EBITDA break-even level in the depressed base prices that we are experiencing in Europe, and this is a great success. At the end, the gradual recovery is a combination of that higher contribution taking advantage of the proper niche in the American market and that the previous loss-making unit that was Acerinox Europa now is turning around and reaching almost the break-even.

If we go to our main market, which is obviously North America, January to September, the States, North America is 56% of our sales, clearly, it's our main market, more than any other circumstance. We are North American, and the main virtue that we can remark today about the American market is the stability.

At the end, this stability is obviously well-supported by the American administration that is consistently supporting the local industry, and this is providing stability, and that stability is good for every player in the market. The prices in stainless remain solid in America, but this is a circumstances that is favorable to the market, favorable to the customers, favorable to the distributors, as also favorable to the producers.

Every player knows the status quo, and consequently, this allows us that even though the demand is low, but the players are facing the current circumstances in a, let's say, satisfactory way. The imports have been reducing, reaching or representing now a 21% of the total market.

Still, North America is a net importer market, but the imports have been reducing more than 18% for reaching that level. This is a good sign for the coming months.

Another good sign for the coming months is also that the inventories remain low, and at the end, what still we are waiting is that the good momentum we are seeing in specific end uses spread to others. Still, the apparent demand is 2% below that one of the previous year.

In America, there are specific sectors that are performing very strong. Obviously, as you all know, the aerospace sector is a sector that is now in a very good momentum.

In addition, also the construction of data center is also driving increases in demand and in consumption of several of our products, and for example, in the all those related to the energy end uses as well as also the pipes and so on. This is also experiencing a good momentum.

Other sectors in which we historically have been active are also doing great. For example, the food and catering industry, this has already recovered.

Still, we are missing sectors that for us are relevant, and one sector that for us is relevant and still remains negative, for example, is the domestic appliances. Another sector that still is to come is the transport, in which especially in the heavy transport, we are active, as well as in the tank trailer.

We are, at the end, as I say, taking the best from those sectors that are doing great, and for us, it's really exciting to imagine what could be our contribution and our profitability in America when the proper cycle comes and all these other sectors that still are relatively dormant incorporate again and follow the trend of the sectors that already have been reacted. We are still satisfied and optimistic regarding the North American market and our performance in the North American market.

Carlos Lora-Tamayo

We move to the European market. This year it's been a very challenging year, a very volatile year for Europe.

The weak economic situation, the geopolitical uncertainties are affecting our demand, no? That is in a very low point.

Saying this, it's true also that in the first half of the year, we experienced a good demand, a strong demand coming from big distributors. This is probably driven by some lack of supply.

The imports in the first half of the year went down significantly, mainly in the first fourth four months of the year. At the end of the second quarter, imports started to increase, and this creates also some excess of stocks in the market that it's been delayed, no, the expected recovery for the third quarter, no, after the implementation of the new trade measures.

Consequently, we have an overbuying, no, in the first half of the year, and then a third quarter marked by the typical seasonality, the energy prices also that went up significantly, yes, both electricity and gas, and also a destocking process. The consequence of this is that the apparent demand went down 22%, a very big number, quarter on quarter.

Imports went down 50%, 5-0, 50% in this quarter and represents 16% of the total market. Keep in mind that we were coming, no, from an import penetration last year, in the first nine months of last year, of 24%, no?

This is the good news that imports are, with this new measures, moving down. Saying this, the third quarter, a very challenging quarter, seasonality, excess of stocks in the market, but what we are fully confident is that the new European regulation, no, is going to be a game-changer for the European market.

Once we digest, no, all these inventories that are in the market, local producers, no, will benefit from this reduction on imports, no? This new regulation will provide, no, much more stability for the market, no, the same stability that we have in the US, no?

We are positive for the mid-long term, no, hopefully the beginning of next year, no, we can start to see this better environment. It's true, no, that this recovery, it's been delayed due to the excess of stocks, the imports that came in advance of the implementation of the new trade measures.

Esther Camós

Now moving to High Performance Alloys. The market environment of the High Performance Alloy industry, same as occurs in stainless, is different depending on the region, but more specifically depending on the sector.

Starting by US, okay, it is true that the stronger support of the US administration to the industry is benefiting High Performance Alloy through the 15% of global tariff on imports. As the Section 232 does not include the High Performance Alloy material.

Demand in the US continues very strong, improving the order entries and the backlog. This, of course, is making that our lead times are extending, but our capacity utilization levels are also becoming higher utilization.

We keep confident on the good momentum for 2027. We have insisted that most of the orders on the aerospace were more for 2027 than 2020 2026, and this is the result and the evidence on the increase on our backlog.

The strongest markets in the US are those in which we are. It's aerospace and gas turbines.

The aerospace continues picking up, and also space application are gaining some traction. The strongest growth is in the industrial gas turbines, as I mentioned, both in traditional and emerging technology, and driven by the power generation requirements for electrification.

Good momentum and good expectations for 2027. Moving to Europe, the demand remains subdued due to geopolitical uncertainties.

We are still waiting some investment projects, but the positive thing here is that we believe that the worst is over. The worst is over, and we have started seeing some signs of recovery, both in oil and gas and in chemical processes.

This keeps us confident for 2027. Just as a note, for the first time, our order book in Europe has become slightly higher than that for 2025, okay?

This is why makes us to believe that the worst is over. Going to some sectors, of course, the geopolitical situation is keeping demand low in oil and gas, but the reconstruction is still to come.

Even it is expected that when it comes, it might create some supply problems due to the excess of demand. We are confident for the future.

While those sectors recover, what we are trying is to capitalize the best of the moment by moving to our production to other improving sectors, like nuclear, with a strong demand for small modular reactors, or semiconductors, with lower volumes, but better margins, okay? We are always trying to get the best of the moment, and our good news here is that we really think that we are seeing signs of recovery.

Going to the consolidated results of the group, okay, again, I think that the operational performance of the third quarter demonstrate the strength of our strategy of diversification. In the third quarter, despite of the lower activity, mainly as a consequence of the seasonality in Europe and also despite of the Middle East conflict, our EBITDA has amounted to almost €200 million, to €199 million, being the best operating result in the last 13 quarters, okay?

Also with margins growing, we are now in margins of 13%, mainly due to the higher activity in the US in both divisions. As mentioned, both divisions are performing better, okay, but with a stronger contribution of the stainless division.

The activity in the third quarter, if we compare, it's been lower than the second quarter, but I think that is remarkable that if we compare to the third quarter of last year, okay, we are growing 11%. If we consider the nine months, we are also growing by a 5%, okay?

I think that the activity is getting better. EBITDA, as mentioned, is 199, mainly supported by the higher activity in the United States, both in stainless and in HPA, but what it's also important, it's also because of the turnaround of our plant in Algeciras that Carlos will later mention.

This EBITDA, well, is negatively impacted by the Middle East conflict. Aside of the impact that it might have on our sales to the oil and gas, definitely the increase of cost in energy and in transport has had an impact in this quarter of €16 million, and €24 million if we look at the year figures.

The result before tax, which I think is also remarkable, is three times with all this, three times better than that of 2025. Now we go to the operating cash flow.

We will later explain in the capital allocation, but we have had a slight negative operating cash flow of €16 million. This is mainly driven by the increase of working capital.

I will explain this as a result of the good trend of results, as Miguel explained, there's been a working capital, but I think that it is important to explain the reasons in the quarter, which is mainly led by two opposite factors, no? On one side, we have had a slight increase in inventories of €71 million.

Out of the €152 million of increase of working capital, €71 million is an increase of inventories. This increase on inventories is mainly explained by three reasons, okay?

We think these are temporary reasons, we will be able to revert in the fourth quarter. These reasons for the increase of the inventories is, first of all, the preparation in the US for our program annual shutdowns, maintenance shutdowns, that we are doing in Q4, both in the United States and in VDM.

This has made us to build some stock to continue being able to serve our customers. Secondly, the higher order book in a High Performance Alloy division extending our lead times and increasing our capacity utilization is making also us to increase our working-in-progress materials.

As long as all this stabilizes, we won't have such an increase. Then there is also a third reason for that, which is the replacement of the external processing at VDM, the partial replacement of external processing by internal insource, which give us also a reduce of cost and improving efficiency, is making us to have a longer route.

All of that is what has made us to increase the inventories. The second reason for the increase of working capital is a reduction of payables of €91 million, of €91 million.

This reduction of payables is mainly due by the reduction of purchases due to the lower activity that we expect for the fourth quarter, okay? We are reducing purchases, but at the same time, we are paying those payables of the highest level of activities of the month of mainly June and some July, okay?

This is what is also making the working capital to increase, okay? With all this, we definitely believe that we will be able to reduce the working capital in the fourth quarter, we will have less activity, and we will generate cash.

With all this, our net financial debt has ended in 1.5 million, but we are confident that we will reduce it for the fourth quarter.

Carlos Lora-Tamayo

The stainless steel division has experienced a a very strong third quarter. In fact, no, is the best quarter since the since the second quarter of 2023, no?

This it's mainly marked by the solid performance in the US, by our North by North American Stainless, that more than offset the seasonality in in Europe, and and the energy prices in increase. This €175 million of EBITDA, it's 14% higher than the previous quarter, and more than double the EBITDA of the third quarter 25, no?

We are seeing a a very progressive improvement during during the year. In the first quarter, we achieved an EBITDA margin of 8%.

In the second quarter, we achieved the double-digit, 12%. In this third quarter, we achieved a remarkable EBITDA of of 14%.

Why, no, the situation, no, this year it's, no, clearly better than than that of of the last year, no? We think that the this consistency and solid performance of of the US market is is key, no?

On one hand, we have higher volumes than than the previous year, but also, as you may recall, we increased prices in in the second half of 25, no, first for 1/3 of our order book, and since the very beginning of of the year, we fully implement the price increase for for the rest of our order book, no? This this allow us, on one hand, to improve our our profitability.

Also the situation in Acerinox Europa is improving, no? That we have the turnaround program, trying to focus more on on margins, on high-added-value product, no, trying to improve our product mix, and and this allow us, as we are commenting today and we explained when we published the second quarter results, to achieve break-even in the month of of June, no, even with very low prices, no, because prices are still in a very depressed situation, but we were able to achieve this break-even.

In the third quarter, it's true that with the increase in energy prices, this has been difficult to maintain, but but we are very very close to to the to to the break-even. If we move to the nine months figure, we achieved an EBITDA of €411 million, compared to €218 million of of that of the same period of of 25.

This is an almost 90%, 9-0, higher than than in 25. Also the the EBIT, no, is at €317 million, that is 145% higher than the previous year.

Last but not least, we would like to highlight the operating cash flow. As Esther mentioned before, no, the the working capital impacted this year significantly, but even with an increase in working capital due to the higher activity of €195 million, million euros, we were able, no, to achieve in the stainless steel division an operating cash flow of €73 million.

Moving to the High Performance Alloys, also we experience a a better quarter than than the second one. We increase sales of 4%, and the EBITDA in in a 9%.

It's true that these figures still are very well below the last year year levels. Maybe to explain this, it's important to look at our main sectors of of consumption, no?

That are aerospace and industrial gas turbine in the States, and oil and gas and CPI in in Europe, no? The those of the US market are performing in a good situation, no, and and the ones in Europe below, no, those of of the US.

The aerospace and and industrial gas turbine, we have a very strong order book, as we are commenting. Important to mention that this strong order book is not yet reflected in the P&L, no?

Not this will be mainly next next year, no? We expect that this good momentum will continue and we will improve our profitability in 2027.

The oil and gas, due to the Middle East conflict, is in a weaker situation, but as Esther mentioned before, no, we think that with the once this conflict finish, we have a a good opportunity, no, to improve our order book with the reconstruction in the in in the area. We have no doubt, no, that this this end market will will improve moving moving forward.

The chemical process industry, the CPI, is the one that is in a weaker situation. We are switching, no, a bit to more nuclear and and semiconductors, trying to improve our presence there, and and we are improving a bit, no, our order book.

This sector is a strategic sector in for the European Union, no? We hope that the Europe, as is doing in in other sectors, can put measures in order to to defend, no, the chemical industry in in the European market.

Maybe to finish with a a positive news here, it is September, no, was the first time, no, in the last 12 months that the order book increase in in VDM, no, compared to last year, no? Hopefully, we are in an inflection point and and the worst is is behind us.

Esther Camós

Let's explain now the cash outs of the quarter. I will start by the remuneration to shareholders.

Of course, half of the dividend of the year is paid in this quarter, okay? We maintain our remuneration policy to our shareholders steady at €155 million for the year, and out of this, €77 million have been paid in this quarter.

Regarding CapEx, we continue, as we have been announcing in all our presentations, with our investments projects to execute the strategic plan. Those investments are, that we have been explaining, are mainly focused on our most profitable markets.

We have finalized the investments of NAS of the €244 million to increase the capacity, all of that we already explained and was executed in Q4, and over the next few months, just in North American Stainless, we will put in place the COX that will allow NAS to produce the long products for Haynes. At Haynes, we have started with the civil works of the new building for the new VAR and for the new forge.

Total investments in the quarter, including also the maintenance, has been of €80 million, and €228 million for the year, in line with the investments that we have been announcing along the year. Tax payments, yeah, we have made tax payments also this quarter of €38 million as a result of the profitability of the US, okay?

Just as a note, last year, for example, and to compare to be able to realize the good momentum of the US market, last year we paid €15 million in the same quarter. Regarding working capital, yes, we have increased working capital, we are confident that we will be able to reduce.

The reasons for that have been already explained. The working capital and in the year, as mentioned, is mainly driven by the increase of inventories, and that increase of inventories have been also affected by higher raw material cost and higher production cost with the increase on the electricity and gas that we mentioned compared to last year.

All in, for us this third quarter is a temporary increase on the net financial debt of €174 million, but we are confident that we will be able to reduce our debt for the fourth quarter.

Miguel Ferrandis

Yes, for conclude, the main the main comments for remark what has been explained. We are proud of presenting today an EBITDA of €199 million in the current circumstances, with all the uncertainties and and with all the challenges and low demand.

For us, this is a a fact of of pride, no doubt. We are taking the best for the solid performance of specific sectors in the States.

Regarding Europe, still the expected recovery in demand that could having taking place in the third quarter still is not coming, but there are some signs that maybe for for 2027, we could see a gradual recovery in the European demand. At the end, the bases are there, the imports are the imports are being reducing, the inventories also remain low, we we we think that this this this may come, but still we have not seen in the third quarter.

Having said that, we have reached a new level of efficiency, and we are almost in break-even in Acerinox Europa, even in the current days where prices, base prices are in the range of €500. This this this could be unimaginable some some years ago.

In our long-term strategy, at the end, it's obvious that the diversification in in regions and in end sectors allow us to to take the best of the opportunities that are coming, and this is the driver of the high profitability we have been achieving in this quarter. Then, thinking from now to the future regarding the outlook, on the on the short-term basis of the outlook for the Q4, we we normally experience in the in the Q4 the seasonal slowdown of our main market, which is the States.

On that basis, we just indicate that probably the probably not, the EBITDA of the Q4 is going to be lower than the Q3. The Q3 is going to be the peak of the of of this year, no doubt.

In the HPA, we we take the best of the sectors that are doing good, and this is this has come and this has come to remain. All the all the evidences for the coming future in the aerospace, in industrial gas turbine remains very robust.

Fortunately, as as we have said, probably the worst is over in the sectors of oil and gas and chemical process industry. The sector of oil and gas for us, especially through VDM, is very relevant.

We are world leaders in in that sector, and at the end, it's a matter of time that this sector may come back. Probably when it comes back, not not only recovering all the all the projects and and expansions that have been put on pause, but in addition, the reconstruction of all the damaged infrastructure probably shall create an incredible momentum for the oil and gas in HPA, this is a sector to be patient and remain.

We have that clear. In the sector of chemical process industries, as has been as has been expressed, we are moving ourselves to those specific parts, for example, like the nuclear, in which clearly also the trend is positive, and we are growing there.

On that basis also we are confident, and this drives part of these green shoots that we are seeing. As general guidance, I repeat again, the Q4 shall be lower.

It's a it's a two months it's a quarter of two months in America, which is the the great contributor to our profits, this is clear, but as a consequence of of that, as a consequence of the reduction in working capital that we shall experience, as a consequence of the more or less seasonal slowdown, but as a consequence of the programs that has been explained by Esther, the maintenance and so on, this shall be reduced, and consequently, the net financial debt obviously shall be also reduced for the third quarter. I I I remember now that the fourth quarter last year, the working capital reduction has been in a range of €200 million, so more or less, we understand that this year, depending on on on on how is the the visibility of the starting of the year, we shall precise, but but we are obviously not only consistent, but focused on the strong reduction in working capital for achieving the fourth quarter.

Thank you very much, and and now absolutely open to answer any question coming from your side.

Borja Riestra Marín

Now we start with the Q&A session and please, operator, go ahead.

Operator

Ladies and gentlemen, we will now begin the Q&A session. If you'd like to ask a question, please press star five on your telephone keypad.

If you change your mind, please press star five again. Please ensure that your device is unmuted locally before proceeding with your question.

Our first question comes from Enrique Yáguez from Bestinver Securities. Your line is open, please go ahead.

Enrique Yáguez

Good morning. I have three questions.

The first one is if you could provide an update about the potential US listing. I noticed that in your first half results, you integrated the accounts of Haynes with NAS, while VDM was transferred at group level.

Second, I would also like to have an update about Columbus situation, which breached its covenants in the first half affected by the delay of the implementation of the measures by the government. Like to know what has been the performance and what do you expect about this business unit and if you might consider a capital injection on it.

Finally, the third question, I know it's a tough question, but how big should be the working capital reversal in Q4? Just the €150 million outflow of Q3 or more?

Thank you very much.

Esther Camós

Let's start by the last one, okay, of the working capital reversal. It's always difficult to predict because it very much depend on the raw material costs.

I think that Miguel also gave an indication of what happened in the fourth quarter of 2025 with a constant raw materials in which we were able to reduce it by the €200 million. Of course, it will depend on raw material cost.

It will also depend on the order book. We think that because of the order book, we won't be raising much more inventories, because it has already been done on the Q3, and on the side of trade receivables and payables, we think that we will compensate these two effects.

It will mainly be driven by an inventory reduction, and we think it's difficult to predict because of the nickel and the raw material, but I think anything about what we achieved last year could be achievable.

Enrique Yáguez

Thank you.

Miguel Ferrandis

In regard to the potential US listing, well, I think this issue was well-explained by our chairman and our CEO in the shareholders meeting, which is at the end, obviously, consequence of our studying of all the possibilities that bring value and being prepared for, as we are making in every sector, capitalizing opportunities. As has been explained, for us, clearly, understanding that we are North American more than every other region, we are growing in America, we are investing in America, because it's obvious where we are obtaining more satisfactory and quick results.

As a consequence of that strategy of growing in North America, it takes sense to make the homework for being prepared if anytime in the future appears convenient, or the board consider that it's valuable to obtain a certain listing in the States. What we are making internally is the homework for being prepared for a possible US listing if the circumstances recommend that.

On that, exploring that possibility, and that homework obviously means that we need to integrate divisions that previously have been performing separately, and even some of them have been recently acquired. We are involved in that process, we are involved in the integration of the different business units, but nothing new is coming since all this explanation was done at our shareholders meeting.

We are keeping that homework for making the group be prepared for that if this is decided anytime in the future. In regard to Columbus, at the end, in the current challenging days for the markets everywhere, we have mentioned that in America, the market is stable and steady and robust as a consequence of a continuous support of the American administration since several years ago, and in different administration periods.

This clearly benefits the market. Fortunately, Europe has been following the trend, and fortunately, during 2026, several measures have been putting on place also for supporting the European industry, and this improvements shall be gradually appreciating in the coming years.

In South Africa, still is a market that has become a open highway for all the Asian exports that are no able to enter in Europe or entering in America, and those are being moved to South Africa. This is something that the local industry has been clearly working and also pushing for obtain equivalent measures to protect the local market in South Africa, but still that measures are not in place.

This has been spoiling the local markets, and at the end, the circumstances obviously is on this basis for Columbus is that is not easy on the current circumstances to have an active presence overseas, and still the local market is suffering this tsunami of the Asian imports that are not finding place in other markets. We remain now confident that maybe that mechanisms are more close to appear.

In the last days, we have been reading that finally appears to be an agreement between ArcelorMittal and the South African government through the IDC, and this maybe could make that at the end having solved all that negotiations for the acquisition of the ArcelorMittal business by the government, maybe could have the consequence that at the end, finally, the tariffs that the industry is claiming for are finally coming, but still we have not seen that. We hope that this may come, and by far, this is absolutely critical for the industry to have that protections in place in line with the protections that other markets are experiencing, but still this is not there.

We are not contemplating a further capital injection in Columbus. At the end, our strategy is making the necessary investments where there is a visible return, and still this is not the situation in South Africa.

As I said before, some of the circumstances may change, and we are waiting on that. On the time being, we shall not make any further capital injection in Columbus.

Enrique Yáguez

Thank you very much.

Operator

Our next question comes from Tristan Gresser from BNP Paribas. Your line is now open, please go ahead.

Tristan Gresser

Yes, hi. Thank you for taking my questions.

The first one is on the Q3 performance that was really strong for stainless. What drove the higher stainless margins?

I think you mentioned production was down 7% quarter on quarter, sales were flat, Europe so additional energy and logistic costs. What drove really the performance?

What am I missing?

Esther Camós

Thank you, Tristan, for your question. I think in this case the Q3 performance strong is easy to explain.

As Q3 in Europe is mainly affected by seasonality, okay? There is a less contribution in Europe and less activity, which is mainly focused in Europe, not in the United States.

Our stronger market continues being positive, and it has had better volumes than Q2, higher activity, and therefore, in the end, the contribution to the group is being higher because of the two effects. On one side, we have less contribution from Europe, and on the other side, we have higher contribution of the most profitable markets in this case, which is our stainless steel position in the United States, okay?

All in is what is making our best performance. To what regards to HPA, we have been announcing also the increase on the order book that we are having, especially in sectors which are more profitable, like the aerospace, and therefore, you have seen that there is a slight better contribution also from HPA to the group.

To what regards stainless, is basically because of the good momentum of the United States. You have seen that there's been also an increase in the apparent consumption in the States in the quarter, it continues the reduction of the imports as well, and all this is making us to get this better margins.

Tristan Gresser

If I understand correctly, that's mainly higher shipments in the US that drove the better performance and margins, because my understanding was that base prices in US have been relatively steady since the pick up last year and the implementation of all those price hikes in the contracts in Q1. Margin have been pretty steady, and it's just higher shipments volumes in the US.

Esther Camós

Correct. That is correct.

It's mainly these higher contribution and volumes in the United States, and the momentum of the seasonality of Europe.

Tristan Gresser

Okay. Just a quick follow up on that, how big is consumer goods, appliances for your US business, and similarly, how big it is for your European operations?

Miguel Ferrandis

Can be very similar, are important sectors for us that are not in the best times, and can be about 15, 20% of our total order book.

Tristan Gresser

That's clear. Last question on the Q4 guidance.

How should think about maybe HPA into Q4? You mentioned that you see faint sign of recovery, might be more of a kind of steady outlook.

Usually what kind of shipment decline that could be used as a proxy a bit maybe for the division you see quarter on quarter into Q4? Also if you could comment on Europe, I don't think stainless steel prices moving up, it feels there could be more energy cost pressure.

I don't know, would you expect some stability from European operations or even heading lower into Q4? Any color on the Q4 would be greatly appreciated.

Thank you.

Miguel Ferrandis

For the HPA, what we are having currently is, as has been explained, a very strong track on America aerospace and industrial gas turbine. This is making us having a high capacity utilization now, our order book is full.

The evidence of this good momentum on the P&L shall come more for the 27. We are benefiting, obviously, for a high capacity utilization and what that implies in the efficiency of our American business, but the main contribution of this sector in profits is to come in 27, still not in 26.

In addition, as occurs in NAS, in our stainless business, the seasonal slowdown in America takes place in the fourth quarter. This is mostly to be appreciated in the coming year.

As is the same in the European division for VDM, we are seeing green shoots now, and this is clearly for us a fact of optimism. The maturity of the process of the HPA creates that it takes substantial months until that is finally drop to the P&L in a strong recovery.

We understand that the worst is over. In terms of the oil and gas, still we are as we are patient, as we have mentioned, but we have seen now some more interest on the ordering side, as we are moving also more to the nuclear, but this is a gradual movement that at the end may come more for the next year.

We understand that the worst year for VDM is going to be the 26, shall be a gradual recovery in the 27. It takes several months from when these green shoots are appreciated to when it's materialized in the higher contribution.

This is more to come in the 27, and as I said before, when we are used that in the stainless, the trends in the demand can follow by a profits movements in two, three months, in the case of the HPA, this takes at least nine, 10 months. This is something to come more for the 27, highly visible and appreciated in the second half of 27 and more evident probably for the 28.

It's a recovery, but it's a slow recovery. Having said that, I repeat, the worst is over.

Tristan Gresser

Just a quick follow, it's very clear on HPA, but the sequential decline you usually see in NAS shipment in Q4 is at what, 15% quarter on quarter, or a bit lower, a bit higher? Just trying to calibrate a bit Q4 expectation.

Miguel Ferrandis

We cannot give too many precise details, but let's make a simple arithmetic. The great contributor to our profits is North America.

The fourth quarter is a quarter of two months. If you bring that in your model, the deviation shall not be high.

Tristan Gresser

Okay. All right.

Thank you. Thanks a lot.

Operator

Our next question comes from Maxime Kogge from Oddo BHF. Your line is now open, please go ahead.

Maxime Kogge

Good morning, team. First question is to pursue a little bit on the guidance.

You're guiding for lower quarter-on-quarter EBITDA into Q4, but that's relatively unprecise. If I may say, can we expect a similar amount as in Q2?

I guess you will have lower seasonality in the US, that's true, but on the other hand, you will have a better seasonality in Europe and slightly more supportive market conditions overall. That would be my first question.

Esther Camós

The second quarter of this year, I think that they had good volumes in the United States, okay? What we are insisting and also Miguel explained is that the one or the region that is going to be more affected, as it is every year, in the fourth quarter is United States, okay?

We won't be having the similar volumes as we have had in the Q2. Q2, in terms of volumes, was also higher in Europe, definitely the volumes will not be that.

If you look, and I think that this is the math that Miguel was trying to do, if you look at the fourth at the third quarter, and you just think that the fourth quarter instead of being three months is going to be two months, because the higher contributor is going to have two months, I think that we are giving more or less an indication of what could be the range of results. We don't think that the prices will continue being as it is, we don't think there's going to be an increase of prices, the margins will be kept stable in all the markets.

The only thing that will happen is that we will have this less activity, it's a question of one month of activity, and if more or less the three months are keeping constant, this is more or less the best indication that we can give.

Maxime Kogge

No, but that's clear. Yeah.

Second one is on utilization rates across divisions. Can you comment a little bit on those, and specifically for NAS, as far as the new cold rolling line is concerned, which has been ramping up since the beginning of this year?

Carlos Lora-Tamayo

The capacity utilization in Europe in the year is about 70, 70%. In NAS, the ramp-up of the new cold rolling is going progressively.

That we don't use, no, to put pressure in the market, we try to take care, no, of the market in this sense. Without the new line, we can be at the 90%, no, 9-0, capacity utilization, and with this new line, a bit below, no, 80, 80-something percent, no, capacity utilization.

In Columbus, no, we can be at 60, 65%. In any case, Maxime, keep in mind that we are, no, switching a bit in our strategy in general sense.

We are not focusing volumes, no, we try to prioritize margin and product mix. Let's say that each time the capacity utilization is less important, no?

We can be at 70 or 75, 80% capacity utilization with very high margins, or we can be, no, at full capacity with lower margins, no? We will try to prioritize margins in this sense, rather than volumes.

Maxime Kogge

No, that's clear. Just a last one is on the nuclear business.

Because this is I think the first time you're really highlighting this opportunity. How big is it for HPA?

Is there any CapEx involved with breaking into this segment or homologation process to really make it significant, yeah?

Miguel Ferrandis

We have been clearly working on that for several months, and at the end, more or less our focus clearly is in the case of the general sector of the chemical process, we cannot wait for a full recovery. There are bases for us to be very confident on the oil and gas in order to be patient there.

In the CPI, which is a very widespread sector, at the end, there are some of the traditional customers that maybe now shall be more open to bring more commodities, imported HPA. What we want is to focus ourselves in the sectors more, let's say, complex, more sophisticated, with more homologation requests.

On that basis, we already were there for certain customers, this sector is growing, and we are making obviously our best and approaching for additional customers. We are in that process.

It's a sector that the prospects are very good, but it shall be obviously a gradual introduction. For us, as I say, is a sector to be in, especially it's a sector that in Europe is a relevant sector to be in, but the effect shall be more gradual.

Maxime Kogge

All right, though. Thank you, I turn back.

Operator

Our next question comes from Bastian Synagowitz from Deutsche Bank. Your line is now open, please go ahead.

Bastian Synagowitz

Good morning, and thanks for taking my questions. Just a couple of follow-ups from my end.

You talk about a maintenance shutdown in Q4. I guess that's probably just the regular, but can you please tell us where that is, and is there any meaningful cost item which you expect in the fourth quarter?

If so, could you please quantify that? That's my first one.

Esther Camós

Thank you, Bastian. The maintenance shutdown that we mentioned is a regular maintenance shutdown, okay?

It is true that in the case of the US in this year, we have an additional shutdown because of the startup of the COX that we mentioned on the long products, but it won't have an impact different to what we have seen in previous years, as this maintenance is a regular thing that we are doing every single year. The impact will be, as mentioned, as it is every year, and just considering that in the end, it is one month in total less of activity with this maintenance between Thanksgiving and Christmas.

Everything, and the market normally is with low activity, and this is the time of the year that we use for this normal maintenance shutdowns.

Bastian Synagowitz

Thanks, Esther, very clear. Then my second one is just on HPA.

I guess looking at the strong performance of your US peers, I suppose Haynes must have been doing very well in the third quarter already. Can you please share with us, VDM, is it still profitable, actually?

Then just to double-check from all of what you've been saying in the previous comments, I guess the improving order book and also the cash out for the working capital you talked about, I suppose that's pretty much all related to Haynes still rather than VDM, even though VDM is starting to see the turning point, as you said, but I suppose not so much in the order book yet in terms of the actual euro numbers here, which you're seeing. Is that correct?

Miguel Ferrandis

VDM is profitable. Its profitability in this year has been substantially reduced.

The most relevant sectors for VDM, as is the oil and gas and the chemical process. Obviously, oil and gas has been the full year on standby.

The chemical process industry most traditional end uses, as has been explained, are absolutely dormant. We are growing and we are moving more and using our possibilities to grow more, as mentioned, in the nuclear.

We are also growing in the aerospace. We still are in the electronic.

We still are in the car industry. There are some sectors that provide stability, compensating from the strong correction we have experienced in the others.

VDM is profitable, remains being profitable, but it's under pressure. Regarding the working capital, some of the effects that are also taking place this year, and mostly in VDM, is as a consequence of a strategy, and Esther mentioned this previously, for gaining efficiency, for doing our best, for avoiding dependence from third players, for reducing costs, we are trying to optimize as much as possible and process and having the possibilities that we have internally in Europe for processing HPA in Acerinox Europa, also in Roldan in the long products.

Then we are in the way for taking the best and the best synergies and the more efficiency for processing that material. This means, obviously, that you need working capital, that instead of remaining in Germany working for German third players, now is sent to Spain, transform, and send back again to Germany.

This, obviously, means increasing working capital, but it's something that at the end brings and has its consequence in a specific increase in working capital, then later on, when it's normalized the volumes and the rhythm of that material that is processed in the south of Europe for sending back again to the north, shall be normalized, but on the time being, this working capital is increasing. At the end, and as I mentioned, is obviously as a consequence of the improvements that are coming and the strategy of optimizing, obtaining the more synergies from that.

We also, in view of the green shoots, we must be prepared for whenever more or less the market experience a reaction, take the most of it. I said previously that VDM is the world leader in the oil and gas sector, no doubt, and by far, we shall be prepared not only for taking advantage, but also for drive the recuperation and take the best opportunities.

All these issues are circumstances to taking place.

Bastian Synagowitz

Thanks, Miguel. Then lastly, can I follow up on Columbus, please?

I guess you've got some trade protection on the carbon steel side and that's been an operation you constantly built out over the recent past. Do you see a benefit from this already and also the restarts of some of the local chrome smelters?

Maybe you can give us a quick update on that side. You talked about the trade protection in stainless, which hopefully is coming, but just a quick update on the rest would be great.

Miguel Ferrandis

It's true that the South African market is under a strong pressure, and there is no doubt on that. Mostly, obviously, the ones that we think are more critical to be quickly implemented as the barriers for avoiding certain imports.

After several years in which more or less the value added in the transformation of all the mining sector has been moving out, and now we, as you mentioned, we are seeing some restart of some smelters, but still this is probably maybe not enough for us, and consequently, we still are not seeing a good momentum and in most of the sectors. As we have been transforming Columbus from a pure stainless plant to a stainless plus carbon steel plus electrical steel, we take the best from every steel sector doing, but still this is not enough.

Still we are facing with very high energy costs, we are pushing and we are trying to obtain better tariffs and so on, and we are under negotiations and discussions for that. Still some of the support that these smelters have obtained from the government have not come to the steel industry, and consequently to ourselves.

We hope that this may come, but not yet.

Bastian Synagowitz

Perfect. Thanks, Miguel.

Operator

Our next question comes from Tommaso Castello from Jefferies. Your line is now open, please go ahead.

Tommaso Castello

Good morning, everyone. Thanks for taking my questions.

I have a curiosity. There's been an increasing discussion around stainless steel slabs imported into Europe, particularly as they remain outside the new import quotas.

I wanted to know whether you see it as a risk that higher slab imports become an alternative route for external materials into Europe and would partly dilute the benefit of tighter safeguards on finished products. Then more specifically, how do you think about the economics of importing slab versus melting scrap domestically in Europe?

Is there an electricity price level above which importing slabs become more attractive than domestic melting? Just wanted to have your view on that.

Thank you.

Carlos Lora-Tamayo

At the end of the day, we prefer, no, to produce with scrap, it's within the most efficient way, no, to produce in our production process, no? At the end of the day, these slabs, no, that you mentioned are coming from Asia.

In Asia, they are mainly producing with NPI, with nickel pig iron, and we do not see a big difference in terms of prices in nickel pig iron and scrap, no? Consequently, we think that producing with scrap, at least for us, it's much more efficient.

The producers that import the slabs, well, probably this is a question for them, they probably, no, may have their benefits and well, they can be impacted also by the EU measures, no? Let's see, no, how this develop moving forward.

Miguel Ferrandis

In addition, our strategy, as Carlos mentioned, we find the best for melting stainless steel scrap, our most competitive nickel is coming from melting stainless steel scrap, and every time we have just made trials for exploring every possibility, this always has been the preferred one. In regarding of the effect of the energy costs, in our case, keep in mind that the one which is hurting us more is the increasing gas.

Consequently, this is not affecting the slabs that may come from outside, because the higher cost increases is in transforming this slabs for the hot rolling operations. There is what is the concentration of higher energy costs, and is more related to that part of the business.

On that basis, it should not be a huge advantage. The electricity is high, and has remained more high, but the most damaging fact for us in this year with the circumstances in the Middle East is mostly gas, and this shall not be solved bringing slabs from Indonesia or other place.

Apart, obviously, that it's fully, as Carlos mentioned, is not aligned with our sustainable and environmental policy.

Tommaso Castello

Now, thanks for that. I just wonder if gas price keeps going up and slabs are cheap enough, it would still make sense economically even though it's against the sort of longer-term objective to import slab at a cheaper cost than producing and melting from scrap if the energy cost is incredibly high.

However, I just wanted to double-check if we can expect into Q4 a similar impact from, yeah, the Middle East conflict as you recorded into Q3, and if that gets baked into the bridge that you were providing for the expectations of the EBITDA into Q4. Roughly 2/3 of Q3.

Esther Camós

In terms of the impacts that we expect of the gas and energy, if we must take into consideration that is mainly focused in Europe. If we take the prices that we have had in September on electricity and we compare to last year, we have having an increase in prices of 74%, and in gas, the price, you can see it in the market, the price of September has been also 100% higher than what it was the same as last year.

With all of this, we are talking about an increase of 74% in electricity and 100% in the price of the gases, and all of that, we are evaluating an impact of €16 million. What I want to say with that is that despite the huge increase, in the end, the impact is limited, I would say.

Carlos Lora-Tamayo

Yes, let me add also that we have in Acerinox Europa, no, some PPAs in order to cover, no, from this very strong increase in energy prices. The PPAs more or less cover 40, between 40 to 50% of our necessities, no?

This, as Esther mentioned, limit in some extent the impact of the huge price hike.

Tommaso Castello

That's very clear. Thank you very much.

Operator

Our next question comes from Rosie Jia from JPMorgan. Your line is now open, please go ahead.

Rosie Jia

Hi, thank you for taking my question. I just have one quick follow-up on inventory build.

Could you give us an idea of how much of the inventory build is actually related to the VDM shifting to internal processing, and then does it mean it could be structural higher inventory going forward? Or and if it's going to normalize, how long do you think it would take?

Thank you.

Esther Camós

Thank you, Rosie. The inventory build of VDM, of course, is not the one representing the higher of the inventory increase, okay?

Mostly, if you look at the volumes and the activity of the stainless is much more higher in this case than the HPA. Mostly the increase comes from the US, and it comes from the both sides, okay?

One is on stainless steel in order to be able to continue serving the market despite the closure on the maintenance shutdowns, okay? The second main factor is, as we mentioned, on Haynes, okay, because of the increase on the order book and the increase of the lead times and the higher capacity utilization.

All of that is making our work in progress so to increase. The build of VDM has also had an impact, but it's less than what we are talking.

Mainly because of the volumes that we are seeing this year, which are still weak in the year, although for the order book is getting better, okay? More or less the main of the impact is not with VDM, although it has had a slight impact as well.

Operator

The next question comes from Íñigo Egusquiza Castellanos from Kepler Cheuvreux. Your line is now open, please go ahead.

Íñigo Egusquiza Castellanos

Thank you. Good morning, all, and good morning, Miguel, Esther, and Carlos, and thanks for taking my questions.

I have three questions. The first one, I'm going to ask you again on the outlook, but on a different way, Miguel.

I don't know how do you see consensus EBITDA of €620 million in 2026, and how do you see the net debt consensus has for 2026, which I think is around €1.2 billion, this is the first question. A second one would be on Acerinox Europa.

I think is quite remarkable that you have been almost break-even in Q3 with the summer, with the energy costs as Esther was mentioning. My question is, what can we expect in Q4 this year versus Q3?

Do you see a slightly better quarter in Acerinox Europa? Then a final question on the following year, 20 2027.

2026 is going to be a, I think, a good year, a good starting point with the company making this EBITDA of more than 600. I don't know how do you see 20 2027 with this expected gradual recovery of Acerinox Europa, with the US also performing quite well and with more new capacity coming in the US, with a slightly more positive outlook for special alloys and especially for VDM, I don't know how do you see consensus or an EBITDA for 2027 closer to 800?

I know it's too soon, but I appreciate your thoughts. Thank you.

Miguel Ferrandis

Thank you, Iñigo. Let's go step by step.

First, outlook, well, the consensus EBITDA, I think more or less we have explained what is the expected profitability of the fourth quarter, keeping on mind that the driver of our profits is experiencing a reduced quarter. It's going to be 2/3 of the normal contribution from America, on that basis, we shall be not far from what is the consensus.

I think, fortunately, the analysts and the active analysts that follow us are very accurate on the projection. We'll live comfortably with that.

Obviously, still that there are uncertainties on place, and this comes more also to the second question that you are today placing. Fourth quarter in Europe, we should have been in the third quarter in break-even.

For us, being in break-even, as I said before, in Acerinox Europa at base prices of €500 per ton is a great success. We have not been there just or we have been slightly below, very slightly below, just because the energy costs.

The energy costs are expected to increase in the fourth quarter compared with the third, as Esther mentioned, consequently, it seems now that it's not going to be the time, keeping on mind that, in addition, the recovery or the expected and seasonal recovery that takes place in Europe after summer, this year has not been active. Still the market is absorbing some of the inventories that were developed in the first semester in anticipation of the measures and so on.

At the end, the performance of the market in the second half of the year in Europe has not been good. On that basis, by far, we are not contemplating price increases in the fourth quarter compensating the high increases in costs.

We understand that the fourth quarter contribution for Europa should be worse, non-relevant, but worse than that of the third quarter. In any case, we are close to be on break-even even at current prices, but probably for that, we need to wait.

Our commercial responsibles for Europe are confident on the 27, and they are start to see more interest on the buying side, there are some signs that maybe for the starting of 2027, we could experience some improvements in the European market, but more or less this is the feeling. Still we have not touched that.

In general, and this goes to the last question, 26 is going to be a good year, as you mentioned. 27, fortunately, I still have not the data, I can talk openly about my impressions, because I do not know the data.

Our budgeting team is expecting to receive the figures for all our business units for next week, and we shall start working on the budget for 2027. What we know from now is that the sectors that are doing good are going to remain good or even better.

As we have explained, for example, everything related at construction of data center still is healthy. Aerospace is going to remain very healthy, and that shall be the time in which we shall start appreciating in results the good momentum of the aerospace.

What is doing now good is going to keep on or even improving, and the worst performer, as we said before, we were seeing green shoots on VDM, on the HPA in Europe, this may come. In Acerinox Europa, we understand that this may come also.

Our instinct at this time of the year is that 27 is going to be better than 26, no doubt, because we are not seeing any specific clouds. The recuperation of the oil and gas, when it comes, shall be, by far, a great catalyst for VDM, but as I said before, most before second half or maybe for 28.

It's going to be gradual the recovery on the HPA in Europe, but at the end, it may come. We think that the worst is over.

Consequently, at this part of the year, we are confident on the prospects for 27, improving the remarkable figures of 26.

Íñigo Egusquiza Castellanos

Thank you. Gracias, Miguel.

Operator

Our last question comes from Tristan Gresser from BNP Paribas. Your line is now open, please go ahead.

Tristan Gresser

Yes, thank you for taking the follow-up. Just on your comment on, I think, and tell me if I'm wrong, I understood that you said €60 million of energy cost, is that for the year?

Is that the figure we need to compare with the 24 million that you had nine-month or it's more kind of annualized? Just wanted to confirm a bit the figure of 60, 6-0 million.

Esther Camós

Sorry, Tristan. It was not 60, but 16, 1-6, is the impact of the energy cost on the third quarter.

That is what I mentioned, probably I didn't pronounce it good, but it was 1-6, and 24 in the year.

Tristan Gresser

All right.

Esther Camós

No, 24 is nine months, of course,

Tristan Gresser

yeah. Okay.

Second question, I know the quotas are working and imports are down, but do you think the CBAM is working? There was a Eurofer position paper put out recently that mentions some pretty significant loopholes, I don't know, from your understanding of the European market, is the CBAM working?

Carlos Lora-Tamayo

With CBAM still there are big uncertainties. I think that it works at the beginning of the year, no?

Is, no, the first time that the uncertainties benefit us, no? All of this creates that the distributors buy locally, no, instead that buy from imports, no?

As we were commenting during this presentation, imports in Europe went down in the 42%, no, in this first nine months of the year, and partially, no, is due to the CBAM. We think that the real game-changer is going to be the new trade measures, no, but no doubt that the effect of the CBAM in the first half of the year also was important.

Moving forward, we think that probably Asian players, no, sooner or later, maybe certified, no, by the companies that the EU, no, assign, and this will dilute, no, the effect of the CBAM, no? As I mentioned, in the meantime, I think that in the first half of the year, imports moved down, and we benefit from this measure.

Tristan Gresser

Okay. All right, that's clear.

Thanks. Thanks a lot.

Borja Riestra Marín

Thank you all for your questions. Thank you, Esther, Miguel, and Carlos for the presentation.

We hope you have a wonderful end of the year and enjoy spending time with your loved ones. Have a good day.