Good morning, everyone, and welcome to the Q3 and 9 months FY 2026 conference call of RHI Magnesita India. We have with us today Mr.

Parmod Sagar, Chairman, MD, and CEO, and Mr. Azim Syed, CFO of the company, joining us in this call.

Before we get started, I would like to point out that some statements made or discussed on today's call may be forward-looking in nature and must be viewed in conjunction with risks and uncertainties that we face. The company does not undertake to update these forward-looking statements publicly.

I now hand the conference over to Mr. Parmod Sagar, Chairman, Managing Director and CEO from RHI Magnesita India Limited.

Thank you and over to you, sir.

Thank you, Rajesh ji. Good morning, everyone, and thank you for joining us today.

The quarter gone by has been defined by resilience and our ability to sustain momentum in the face of macroeconomic headwinds. We have maintained our market leadership on the back of our diversified product portfolio, longstanding customer relationships, and agile production capabilities.

At the outset, let me start by highlighting that safety remains our highest priority at RHI Magnesita. I'm pleased to share that we have been formally recognized by the World Refractory Association for exemplary safety performance across nine refractory service locations.

By enabling safer, more efficient steel production, we are strengthening India's industrial backbone and supporting the $5 trillion economy vision with self-reliant supply chains. This quarter, we maintained our strong market position and achieved record revenue again to the tune of ₹1,092 crores despite macroeconomic headwinds impacting the overall market.

We once again surpassed our ₹1,000 crore revenue benchmark, a testament to our strong business fundamentals. EBITDA achieved at 13.7% in this quarter, which is highest in this fiscal year.

Strong iron making project orders delivered through OEM orders coupled with good momentum in flow control and 4PRO delivered expected and tangible returns. Even though the external environment remains demanding, our performance reflects the steady outcome of strategic decisions made consistently over a long period of time.

From industry perspective, refractory continue to face structural pressure as domestic overcapacity addition outpaced demand, and oversupply of import commoditized refractory products further intensify market challenges. A similar situation exists in our core end market of steel and cement as well.

End steel producer face Chinese steel dumping, but safeguard tariff of 11-12% in Q3 and Production Linked Incentive were introduced by government helped to curb low-price imports. Hence, India returned to a net steel exporter position in Q3 2025-26 after six consecutive quarters.

However, it must be noted that the safeguard tariffs are only applicable for specific grade of flat steel products. Despite Indo-Europe and Indo-US trade deals, no further increase of exports in steel are to be expected.

Cement sector delivered strong shipment volume during this year. However, margin were under strain with capacity utilization between 55% to 60% only.

With a 10% year-on-year increase in government capex along with real estate focus launched in recent budget, it is expected to improve utilization levels further. The recent budget sustains strong infrastructure spending across roads, railways, housing, supporting steel and cement demand.

The Construction and Infrastructure Equipment scheme will promote heavy equipment manufacturing, further boosting steel consumption, while the ₹20,000 crore carbon capture, utilization and storage fund advanced decarbonization in steel and cement. Together, 10% capex growth, the CIE scheme, and decarbonization initiatives created a structural opportunity for refractory suppliers aligned to steel cement value chains.

However, the industry continue to await targeted interventions such as duty relief on key raw materials to enhance cost competitiveness. The above initiatives are positive from a growth perspective for our customers.

However, we are cautiously optimistic due to the industry challenges. Our strategic initiatives are gaining traction across both solution-led and product-led businesses.

Our future focus for this and next year would be on strengthening the core while delivering sustainable long-term growth. Our focus areas for this year includes expanding our 4PRO footprint across cement, steel, iron making sectors.

As you people know, 4PRO means total refractory management with sustainability inclusive in that. Focus on our customer relationships, strengthening our iron making business by enhancing our presence in coke oven and blast furnace area by launching new DRI products, increasing our share in blast furnace runner management and taphole clay supported by commissioning of the semiautomatic taphole clay line in Jamshedpur, revive the HPI, hydrocarbon processing industry, business of legacy RESCO from US in India and establish a clear growth roadmap, continue with our cost optimization program to remain competitive and control the spend with the right trade-offs, advancing our R&D agenda by optimizing recipes with recycling to support circular economy initiatives while accelerating new product transfers, development, and portfolio harmonization, maintaining strict margin discipline to ensure sustainable and profitable growth.

India remains a key market for global refractory suppliers with competitive intensity high across products and customer segments. Despite this, we remain confident in our ability to respond to challenging market needs.

While remaining mindful of short-term challenges, we are cautiously optimistic about the path ahead. Financial year 2025-26 till now demonstrated a resilience, and we are now focusing on converting this into tangible gains through disciplined execution and sustainable market share expansion.

We are honored to have received recognition from both Steel Authority of India and Tata Steel Group, affirming the strength of our product quality and execution. CII Award for Social Governance Excellence underscore our dedication to responsible business practices, while Tata Steel naming us Agile Partner of the Year highlighting our capability to deliver in complex steelmaking environment.

Also, we have received safety award from Tata Steel. In summary, while challenges remain, we are confident that our strong fundamentals, disciplined execution, and customer focus will sustain our growth momentum.

I will now hand over it to Azim to take you through the financial performance in detail. Thanks a lot.

Thank you, Parmod ji, and good morning to all. Let me now walk you through the financial results for the third quarter of FY 2026.

Despite market headwinds, we achieved our highest ever quarterly revenue of ₹1,092 crores. This reflects a sequential growth of approximately 5.5% over Q2 FY 2026 and a year-on-year increase of 8% versus Q3 FY 2025.

This growth underpins our strategy in action. This growth was driven by 4PRO wins across steel plants and project deliveries in iron making.

Average realization improved sequentially, rising to ₹80,410 per metric ton in Q3 FY 2026 from ₹73,237 per metric ton in Q2 FY 2026, reflecting an improved product mix, one-time performance bonuses, and pricing discipline. The same is reflected in adjusted EBITDA at ₹150 crores, which marks a 36% improvement over the previous quarter and 14% year-on-year.

EBITDA margins improved to 13.7% compared to 10.7% in Q2, driven by the same reasons which we mentioned for realization. Profit after tax for the quarter stood at ₹62 crores, up by 61% quarter-on-quarter and 29% year-on-year.

Additional employee costs arising from the new wage code implementation and higher cost due to rupee depreciation pressured margins, which was offset through operational excellence program, which focuses on better manpower planning, machine-level loading, and tighter control over discretionary spends. I'm pleased to share that we recorded highest ever operating cash flow at ₹289 crores in current quarter, representing a 627% quarter-on-quarter increase.

This improvement was driven by strong EBITDA growth, disciplined working capital management, particularly tighter inventory control and improved collections. Turning to the balance sheet, we continue to operate with strong capital discipline.

Between Q2 and Q3 FY 2026, net debt reduced from ₹200 crores to a net cash position of ₹35 crores. Hence, net debt-to-EBITDA ratio improved from 0.5x to -0.1x, which is first time negative leverage post-acquisition.

This reflects disciplined capital allocation, robust cash generation, and tighter working capital management. We now have ample capacity to fund working capital requirements and pursue any growth investment without overleveraging the company.

Looking ahead, we remain confident and realistic quarters driven by robust order book and pricing initiatives, input cost optimization through our productivity initiatives, and normalizing raw material costs. In closing, RHI Magnesita India delivered solid top-line growth with strong margins in Q3 despite industry headwinds.

The business fundamentals have positioned RHI Magnesita India for success through strong industrial demand, solid execution on strategy, and a healthy balance sheet. Thank you to all our stakeholders for your continued trust and support.

We will now open the line for questions.

Hello, sir. Good morning.

I have one question. As mentioned that there was one-time bonus received, can you quantify what was the amount of the bonus received during the quarter, plus what are the other factors which are driving the margins for us and the sustainable margins?

Actually, when Azim said one-time bonus, it doesn't mean it is one-time. Actually, in last quarter, we did some ladle and converter lining, and over a period of time, it start realizing in bonus because there's a guarantee clause, and when you are overachieving than guarantee, then you are getting bonus.

That we got in this quarter, and we assume that it will continue that quarter as well because whatever we supplied to the steel industry on guarantee basis, it is yielding results in terms of bonus.

Yes, you're clear about the process, but I'm asking what is the amount that we have received this quarter, and how much are we expecting for the next quarter also?

We don't give those outlooks or the current performance. We don't separate out that performance purely because it's very difficult even for us also to model this because it has multiple factors.

One, how many contracts we have; second, is also the performance of the products and when it will be realized based upon the steel production or consumption of our materials. We don't give out this material.

We have never done that historically. We will not start to do that now.

Thank you.

The amount of bonus cannot be disclosed?

No, we don't do that because of the variability as I mentioned earlier.

Okay. The margins this quarter besides of this bonus has increased because of what all reasons, sir?

Yes, absolutely.

Yes, absolutely, yes. Sorry, the question was product mix?

It was because of the product mix majorly, right?

Absolutely.

With

the previous quarter, we had cement as well that had a lower realization, right? This time, we have not the cement orders, we also have some high-margin OEM orders that also contribute to the increase in the margins as well despite the performance bonuses.

Okay. Got it, sir.

Thank you. That's all.

Yes.

Good morning, and thank you for the opportunity. Congratulations for good set of numbers.

Sir,

what is the total installed capacity across plants and the utilization rate, and what will be the peak revenue if the plant is 100% utilized?

The current quarter capacity utilization on a consolidated manner is 64%. Again, the basic question is that the installed revenue on overall capacity utilization cannot be directly derived because of multiple reasons.

One is the pricing ability because as you know in Chairman's remarks, you would have clearly heard that we have quite a bit of a market headwind. The realization rate is subject to especially for the commodity products, it is subject to the market conditions.

You cannot directly consolidate it. Second reason basically also is that our lines are sometimes flexible, which basically means sometimes we can do different product portfolio on the same line.

Hence basically what it is very difficult for us to kind of to say that, okay, if you fully produce, you're going to get this, because in some months, we have project orders especially for the industrial let's say like non-ferrous and glass, which has higher realization rate versus a cement brick, which has probably a lower realization rate. It will completely skew up the number.

Having said that, the line process is completely different. It's just the raw materials and the recipe that we use are completely different.

Unlike cement or steel industry, it's very difficult to directly give an estimate here. Sir,

the next question is about the recycling percent target. Currently, I think so in presentation it is mentioned 19%.

Yes. Our target is to take it beyond 20% in coming year.

It will be gradual process. You cannot jump from 19% to 25% or so.

You need to see the products where you can increase without impacting any quality or performance. We are not compromising.

We are using recycled material after thorough processing as raw material, not just taking out a used material and crushing and putting it in some recipe. It will be gradual, but still we are going reasonably well.

Thank you, sir. I appreciate you answering my questions.

All the best for the future.

Thank you.

Sir. I had a question on the realization.

While it has jumped from ₹73,000 to ₹80,000 odd sequentially, this captures some part of the performance bonus, is that correct? What is the realistic realization growth that has happened this quarter and what is a sustainable realization per ton?

I just want to get a hang of the price increases that you have got, that's all.

Rajesh ji, yes, it has impact because of bonus in realization, but it is not that substantial that it cannot underlying that it is because of bonus, right? It will keep on changing also depending upon the product mix.

Like this quarter, Jan, Feb, March, is a lean period for cement industry, okay? It will have a different impact on volume and profitability in that particular segment.

At the same time, if you have a high-end like Azim was saying glass order or coke oven order, then it also neutralize it also. I think anything between ₹76 to ₹80 should be the healthy numbers without any performance bonuses, etc.

Also, just to clarify for everybody on the call, what do we mean by performance bonus. This also has an impact on the realization rate, is that in the previous quarter, for these contracts, we have installed the material.

That means we have taken a cost in our P&L, and we have not realized any revenue or profitability because you earn after the product performs. There is a lag in the way we earn the money for the cost that we have incurred in the previous quarter.

This also has an impact on the realization rates as well. We call it bonus because it comes a bit late, and also it depends upon how much performance it gives.

Just to clarify that although it's called a bonus, it's just the lag effect of the materials that we installed and the performance of the product. These both determines our performance bonuses.

Yes, sir. That's useful.

Just a follow-up question on the margins. We had guided 14% to 15% margin that we are going to see in terms of normal business coming through in fourth quarter, this is without the project orders?

Rajesh ji, there's a saying: Yeh dil maange more. Sabhi dil aur maangta hai, okay?

We have too much headwind. I still say we want to have a sustainable margin between 14-15%.

This is our wishful thinking, and not only thinking, we are working towards that with various processes and levers, actions in place. That's why you see this upside in this quarter.

I cannot preempt for the next quarter, but I think we should be now in this line in coming days as well. Whatever we action taken, it will keep on yielding results in coming days as well.

Thank you so much, sir. I'll join back in the queue.

Thank you. Thank you.

Thanks for the opportunity. Sir, what would be the export contribution in the 9 month?

It is flat as of now like last year 9-10%. International market is so docile.

We did a lot of trials, but I think in last quarter also I mentioned this maybe in 2026 April onwards, we will have some upside in export because whatever trial we did in this 9 months and are doing in this current quarter, probably it will start converting into order. There will be some uptick, but at the same time, it will not be exponential because the export is only isostatic and slide gate refractory, which we call flow control.

Flow control tonnage-wise or revenue-wise is not, as I said earlier, it is about 25% of your total revenue. If it is 25% and if it increases maybe from 9-10%, it will go to 11% or 11.5% or 12%, it will not be from 9-10% to 20%, okay?

Flow control contribution also is flat YoY means? Like the overall as part of the overall revenue?

There is a bit of increase, but not substantial, sorry.

Just on the margin if you could just give a flavor on the Q4 what we are expecting in terms of margin?

That's what I said to Rajesh ji also. We expect it should be on similar lines, if not better,

slightly better.

Sir. Thank you.

Thank you. We want to be a bit cautious because of market conditions.

Yeah.

Hi, sir. Congrats on a good set of numbers.

Just a couple of questions. Earlier, say 5-6 years back, we were completely focused in the steel segment and now we are progressed into the cement and iron.

Is it because of a stagnation in pan growth in steel segment that resulted in us exploring this lower-margin opportunities, that's number one. Number two, can you also quantify our current market share in steel, cement, and iron?

Thank you.

I will take this. I think our strategy always has been to kind of grow in refractory business.

I'm sure if you're covering steel market, you will very well know that the Indian GDP consumption for cement is the lowest in the entire world, especially for the middle-class market. Because of this and also we were also very clearly seeing that the infrastructure spend would be also going higher from a government perspective.

These two factors basically points to a very clear realization that the cement market is going to boom in the upcoming years. I'm talking 2 years back, and today it's a reality.

Even in the current Union budget, you can see the amount of infrastructure spend was allocated. With this in mind, we wanted to also grow in the cement market and hence we did couple of acquisitions that kind of supported our cement growth market.

To kind of clarify the second question, although it is lower realization, there's going to be a good growth opportunity and our strategy from the beginning was that we want to be having the highest market share and grow with the market where possible or in some cases outgrow the market itself. For the outgrowth of the market, we are basically focused more on the iron making, DRI, coke oven, and pellet.

Now coming to the market share, we have about 32% market share on the steel side and on the cement side, we have close to about 40-41% of market share in the business, to answer your question.

Thank you, sir. Just a follow-up.

In the steel segment, last quarter we said that the margins have improved to 11.4%. How's the margin for this quarter?

Can you repeat the question? The margin was how much you said in the last quarter?

In the last quarter, you had told that the margin in the cement segment specifically was 11.4%, it improved from 8% to 11.4%. What could be the margin for this quarter?

We normally don't give out the margin separately by steel and cement, I cannot recognize that number, but

Actually, probably you are saying from Dalmia plants.

Yeah.

Right? It is not cement, but primarily it's a industrial business.

Okay.

That is almost at same level, 10.5% to 11% or so.

Exactly right.

Perfect. Thank you, sir, and congrats on a great set of numbers.

Thank you.

Thank you.

Thank you.

Hello, sir. Thank you for the opportunity.

I have a couple of questions. Firstly, can you tell me what is the revenue mix for the quarter between cement and steel, and did we get any benefits of new plant commissioning in this quarter?

Let me give you the number for the ratio between cement and steel. Steel was at about 80%, industrial was 20%, of which cement in particular was close to about 10%.

For the greenfield, yes, we have signed some new contract with some of the greenfield project with one of the biggest integrated steel plants somewhere in Punjab.

Ludhiana.

Basically Tata Steel Ludhiana, we just signed a 4PRO contract as well in the month of January, which as soon as it'll get commissioned somewhere in the middle of the year, we'll start taking the benefit.

Middle of March probably they have a target to commission, next fiscal it will be upside. The business should be on the tune of say 5 to 6 million or ₹50 to ₹60 crore additional business from that 4PRO business.

Exactly.

It is end-to-end: furnace, ladle, ISO, flow control, everything. First time Tata Group strategically, they have given from the commissioning stage 4PRO contract to any refractory industry in the world.

That is a big achievement I would say.

Great, sir. Next question I have is with respect to the quarter, we saw a fair bit of improvement in margins.

Can you explain how this margins switch has happened? Is it because of improvement in pricing with respect to product mix or is it because of a general reduction in input cost?

What is the levers that's helping us to generate this higher margin?

Actually, we cannot pinpoint one lever. We are working on many things.

Raw material is soften a little bit, yes, what you are saying input cost. At the same time, we did this operational excellence in our plants to control the cost.

We start working on optimization of recipes, product specification look to exactly to the requirement of the customer. We start increasing our recycling rate in our plants.

We are working on reducing our scrap rates or rejections. There are multiple things.

At the same time, we are very cautious about pricing with our customer. Wherever we need a price increase, we are pushing for that, and at the same time, if the pricing is so bad, we are not into rat race.

Hello?

Yes, sir.

We are not into rat race of getting the order at any cost. We have our internal strategy up to what level we will go for a order, or if it is below that, we will not go.

We will leave it. These are yielding results, okay?

Sir. If you had to bifurcate, we had a 200 bps improvement in gross margin, how much would you say came from internal efficiencies and how much is from RM softening?

Your question was not clear. Bifurcation of what you were speaking, can you please repeat?

The 200 bps improvement that we have in gross margins, could you tell me how much of it came in from internal efficiencies and how much of it is from softening of raw materials?

You cannot see the direct bifurcation, but if you have to make an assumption, you can look into the other expenses. Maybe that will give you a very good idea in terms of how we have improved our operational cost as such from a per ton perspective, that's a one of the ways to look at that.

Again, it's a super high level just from a assumptionary purposes you can use that. On the material cost, you can basically say that although we had a softening in the alumina prices, this was further negated by FM, graphite, and bauxite price increases as well.

You need to take this number with a pinch of salt here. Because

I do get the broad reduction in other expenses, that is taken. Only thing is the improvement in gross margin, is it a pricing function where we went for a better quality product mix or is it because we had benefits from input cost falling?

I'm just trying to figure out if it can get to that point.

As Parmod ji mentioned, see, in the previous quarter, we had low-margin cement orders. You had a realization impact.

This time, you don't have the lower cement orders. Second, product mix.

We had more converters, RH degassers that we sold in the current quarter, you had a product mix improvement as well. Now what Parmod ji mentioning is that on top of this, we had some operational excellence programs, which we do normally every quarter.

We do this as a part of our continuous effort where we focus on operational excellence program, which focuses on two things: one is productivity, second is on the safety measures. This also aided our benefit because as you saw that our volumes are lower, which basically means that on the cement side, we had lower volumes.

The question is how do you effectively plan your manpower, how do you effectively plan your raw materials and finished goods? These kinds of operational excellence program have further improved our results.

I hope that gave a clarity.

That explains it very well. I just have one last question.

Can you tell me what is our target with respect to this traded goods volume that we have with our parent, and are we trying to substitute that with a bit of domestic production going forward? Do we have any strategy there in place?

Absolutely. Your voice was not clear, but let me repeat the question what you answered.

Your question was what is our target that we are looking forward in the trading percentage? The answer is that we don't have any specific targets there, but if you ask me differently, do we want to localize it?

Yes, you can see in our investor deck on the R&D page in terms of the amount of new product transfers and development we are doing. Again, the focus is more to get some highly specialized product, especially in the area of cement and some of the high-end technically advanced solutions.

We are in the process of transferring now. Although we have transferred the technology, we need to localize it to the local market demands.

Yes, our domestic production on these product portfolios will increase quarter by quarter. It will be a slow and steady increase because we need to have the product acceptability, we need to demonstrate through various trials, and once there's an acceptance, you will see that production volume increase as such.

I think you are seeing this in a trading percentage also going lower as well, over the course of years, yes, it will increase.

Yes, sir, just to continue on that, I get that directionally you're moving towards a higher mix. I'm just trying to figure out what would be our long-term or say a 3-year target in terms of how much of our volume should we want to keep entirely from our domestic production because I think today 40% roughly in terms of volumes is from the traded parent.

What would be a number that we would look at, say, a couple of years down

the line? These volumes is not only the parent company, these volumes also includes the toll manufacturing as well.

Please bear that in mind that it's not like 40% of the volumes we are completely trading. We are getting from the group.

That's the first assumption I want to kind of qualify. The second basically is that if you think about the product transfer, we look at it from how much of added benefit it'll have, again based on multiple factors.

One is the closeness of raw material. Some of the products are very closer to our parent companies' raw material production, you get quite a bit of unique geological benefit.

Of course, these products we'll not transfer. The products we will transfer is that where we have availability of raw material, our ability to produce the technology, and third, of course, is a solid business case.

We only entertain if the business cases are right in double-digit. Once these three things gets qualified, that's where we make the investment and ensure that it's moving.

At the moment, if you look at it, we are more focusing on our industrial business, which is basically cement, and non-ferrous metal, and glass. This is where we are focusing apart from some of the acquisitions that we have done recently.

This is where we kind of think about how we can localize the product portfolio. We'll not give the percentage because it'll tip off the market in terms of what are the products we're bringing in here as well, but we will keep on updating whatever products which is in product for transfer.

On page number 17, you can see in the investor deck something similar. We will start to publicize this.

Thank you so much.

Thank you.

Thank you for the opportunity, and many congratulations for good set of numbers. Sir, my question is again on the margins.

As you rightly pointed out in the beginning of the conversation that situation in the market is not so great in terms of oversupply situation. At the same time, if you look at the profitability of steel businesses, that has improved significantly in last two quarter or last one quarter.

Do you think that from here on if any margin increase could happen, will it be possible for us to take price hikes to improve the margins or is margin improvement can only depend on our product mix or internal efficiencies? That's my first question.

Price we always try to get price increases from our customer wherever is possible. At the same time, market is so overcapacity, and with due respect to our competition, most of the competition try to grab order at any price.

When they are so aggressive to get the orders, to getting price increase become very, very difficult. In one of the cases, I just give you an example.

In one project, cement project, we were at 8% margin, and then the counter came to us with 13% lower margin, 13% negative margin, and one of our competitor took that, and it is not a B or C grade competition, it was A grade, our level of competition. Some people try to just grab the order to fill their additional capacities which they have created.

It became very, very difficult to go and say I need a premium, I need a different pricing than the competition. Best way is how you can control your cost, how can you increase your efficiency, productivity, reduce your scrap rates, increase your recycling.

We are working on that. At the same time, we will keep on striving for a price increases.

As you said, steel industry if they will have a comfortable situation with their margins, definitely they will not be so rigid about price,

but

at the same time, industry as a whole has to behave responsibly.

Understood. Secondly, whatever cost benefit we could have taken on account of raw material cost lower that we have already factored in, and from here on, we are not expecting at least for a quarter or two any raw material cost advantage to kick in the P&L?

I fully agree I don't see now because alumina prices are at its bottom. It can go up, will not go down further.

Magnesia, if we talk about, it had a bit of upside, and I don't see it will go further up. I can say it can be a status quo for next 2-3 months to maybe 4, 5, 6 months.

There will not be a substantial delta upside or downside.

Right. Lastly, sir, because now we are into net cash status, two things: either will promoters be willing to buy stake if Dalmia tries to reduce their stake from 13%, are the promoters willing to increase the stake in the company, or with this cash status, are we more inclined to go for any inorganic expansion?

As of now, nothing is on the table. We have not discussed anything at length whether we want to buy back those shares or not.

Maybe if Dalmias has to come forward whether they want to sell it off or not, and then we will take a call whether we want to or not. About this second part what you're saying is inorganic, that also we don't see in 2026.

Actually, I personally don't see. I wanted to consolidate whatever we acquired, okay?

Again, if the parent company will push us, "No, no, this is a great opportunity. We should do that," we will definitely try to do that.

As of now, my idea is just to consolidate, bring the margin level to a respectable level, sustainable margin, and then think of further expansion or acquiring the company.

Very clear. At least promoters are not averse to buying Dalmia stake if it comes in the market.

I'm not saying they are not averse. We have not even discussed because Dalmias has not reached out to us whether they want to sell off their shares or not.

When they will reach out, then we will talk to the parent company, Stefan Borgas, our global CEO, and then we will come to know whether they are averse or not averse.

Fair. No issues, sir.

Thank you so much, and all the best.

Thank you so much.

Good morning, sir, and congratulations again for a record revenue number. My first question is if you can help me understand what is the percentage of imports that is posing a big competition to our Indian market?

What is the percentage to our total demand if you can give some number? Also, what kind of products are these?

Are these largely bricks or just a bit of color on that, what kind of products are these?

Our export revenue percentage for the Q3 number is 11 point

He is asking import.

Import, oh, okay, my apologies. I misunderstood it.

We basically group this number with the set of the trading percentage numbers. We don't give out this specifically because it gives us a little bit of a competitive edge in terms of the product profile that we import, Sahil.

I'll just rephrase my question. I meant as a country, the kind of imports that we are having which is posing a threat to the overall how it's getting an oversupplied market.

Just that on that color, Parmod sir did allude to a lot of imports coming. Yeah.

Sahil ji, mostly, there are two buckets. One is where we have a technological advantage, like our product like Ankerharz.

Everybody, our competition over the ages, years after year tried to copy that. They could not because of some inherent raw material available with us and this is a very niche product.

We cannot make it in India, it will keep on importing because for electric arc furnace, this is the heart of that performance. That gave us lot of advantage over our competition.

Same way, there are few products, I just give you one example, there are few products where we have real technological advantage, and we have raw material over there, we don't want to shift it to India. There are some products which we are still importing and we are doing the accreditation in Indian plants.

We are doing the trials in Indian plants, and gradually, we will shift those products to our Indian plant to take this capacity level from 64% to 75% and beyond. It is a time-consuming process.

We are doing that gradually. We understand the market dynamics.

If we are local for local, we have advantage with the same product because we will be doing the technology transfer to Indian plants. These are two buckets.

One we will not touch. The other we gradually will shift to India, okay?

Right. Right, sir.

Sir, second question is that in FY 2025, the total revenue contribution from total refractory management was roughly 41% as I can see in the annual report. Any sense you can give what that number could be this year, maybe ending this year or currently where we are on that number?

Ending this year probably will remain same. Next year, we should have advantage of 4% to 5% upside.

AM/NS and

Tata

and all those things, right? It will go up 4% to 5%, okay?

Sure. Thank you.

Thank you so much. That's all from my side.

All the best.

Thank you. Thank you.

Hello, thank you for the opportunity and the congratulations on a good set of numbers. I wanted to understand from the induction furnace point of view.

Could you provide a breakdown of the revenue contribution from induction furnace and ramming mass within your portfolio? How do you see the market of ramming mass developing, how is it going from unorganized to organized?

What matters for induction furnaces, is it the cost, proximity, or price for ramming mass? Thank you.

When you talk about ramming mass, it is a very generic term, ramming mass. There are silica ramming mass, which people are using.

We don't make silica ramming mass, one product which you are talking about is not under our radar. There are some other ramming masses like neutral ramming mass that we want to pursue.

We did some trials. We will definitely be more aggressive in that market.

If you talk about induction furnace, I don't know why you're so much interested only in induction furnace, but I don't have any hesitation to say it is about ₹500 crore business or so.

Okay. Thank you.

Thanks, sir.

Thank you for the opportunity, sir. Am I audible?

Yes.

Sir, my question is also on the line of localization. We understood that we won't be giving specific number, I'm clear, but directionally how have we been in this localization trend when we compare to our last years when we were giving out the trading numbers?

Sir, we could hear you, but your voice was not clear, we couldn't understand your question.

Is it better now?

Please give it a shot.

Yeah. I understood that we won't be giving our trading numbers, which we were giving during last year calls.

Directionally, how have we been in this localization journey when we compare to last year, even if it is not a specific number?

Absolutely. We have introduced quite a bit of new products, especially on the iron making side, which kind of aligns with our strategic initiatives.

We were able to make quite a bit of a significant progress. Hence in the last three three quarters of our investors deck, we are making it absolutely clear what are the kind of products that we're doing.

Rather than stable, this will increase. As I said, it has multiple factors.

One is our ability to get the raw material; second, is our ability to localize these recipes for our Indian customer needs; third is trial stage; and fourth is acceptability. If you think about in this four process, we have introduced quite a bit of new products on the iron making side, we'll continue to do so.

We have done something on the cement side, we will continue to do so, and now we are also importing quite a bit of advanced technical specialized refractories for the upcoming quarters as well.

Thanks, sir. Sir, my second question, it's again a follow-up to an earlier participant.

We were discussing about our margin levers where we discussed about price increase, internal efficiency, or volume growth. In that, while we were discussing about price increase with the competition scenario right now, price increase will not be something which we can go aggressive on.

The realization which we are at right now, is that sustainable? I heard the number to be ₹78,000 to ₹80,000 the range.

Is that range sustainable with the competition intensity right now?

As of now, yes, we think it is a sustainable number in the short term, but market is so volatile, I cannot predict after 6 months or so what will happen. As of now, yes, it is sustainable.

At least for 3 months, let's put it like that.

Sir, in the total refractory management contracts which we enter, we would be agreeing to rate upfront for a certain period?

Yes. Yes, we have to fix rate for certain period and then there is a price renegotiation periodically.

In some cases, it's 6 months, in some cases it's a 1 year.

Right, sir. Right.

This contributes to 40% to 43% of our overall business?

As of now, yes, 40-41%, I think. It's a little less.

It's actually 33% is for the previous quarter. I think 45% is not the right number.

I think one of the analysts mentioned it. For FY 2024, it was 31.3%.

In the current quarter, it is 33.1%, yeah, exactly.

Right, sir. This includes both 4PRO and TRM?

See, we stopped doing TRM because as Parmod ji mentioned earlier, that we wanted to include two Ts here. One is the planet piece, which is the sustainability part in terms of how we can effectively get the recycled material from our customer; second is also the usage of robotics using artificial intelligence to ensure a safe and a highly productive operations for our customer.

That's why it's slightly different than the previous TRM, but TRM is a subset of 4PRO, let's put it like that.

Basically your question and whatever you ask is right. It is a combination of TRM and 4PRO.

In some cases, it's still TRM. We did not succeed to get the material back or putting a robotic or artificial intelligence.

It is very, very conventional TRM in most of the cases. In some cases, it is 4PRO.

Now we start using terminology of 4PRO just to emphasize on our customer, on our team itself, that this is the way forward.

Exactly.

Right, sir. That's it from my side.

All the best for you, sir.

Thank you.

Hello.

Yes.

Good afternoon, sir. Sir, I just wanted to understand for these new products that are in pipeline, how can we expect their contribution in the coming year for '27, what percentage can be expected in the next 1

to 2 years? If you think about it, if you if you refer to page number 18 in our investor deck, you can see the magnesia spinel bricks for our cement customer.

It So we're already selling these products to our customer today. Now what will happen is that we will localize this production rather than getting it as an imported product, you'll you'll kind of, get a working capital benefit here.

You have the mag-chrome brick for RH degasser. This also we're kind of, will be localizing the production because, again, you pay lesser production cost maybe comparing to the place where we are importing this from today or plus on top of it, we save on the transit time and so on and so forth.

There are various advantages, some will be additional revenue, some will be you get a working capital benefit. This is the way we kind of, see this improvement per se.

Again, it depends on the product portfolio and other thing, but yes, definitely it will overall improve our margin by, by very, very very lesser percentage, but on the overall on your net cash performance, you would see a quite a huge benefit, Neha, if that helps.

Right, sir. Coming to the working capital part, do we have a lot of stress due to the PSU receivables?

Do we have what? Can you please repeat the question?

Again, it was not clear.

Stress due to PSU receivables on the working capital front?

Yes, we do have a healthy receivables from the PSU front. We don't see any big challenges today as probably we had once, last year, 1 year back.

It's improved quite significantly. Again, that was only with RINL, and I think due to the cash infusion on the RINL side, it's kind of have improved.

It is getting better and better. Still, we have some collectables, but overall, we are in a very healthy position with our PSU.

Sir. Got it.

Thank you so much, and good luck.

Thank you.

one question on the sector IFGL Refractories. We've seen a lot of CEO exits and what is happening in that company?

Is the company up for sale or what is happening there? Are they competing also actively in the market or what do you see happening there?

Look, we love IFGL. I don't want to give any comments on that, but I am really surprised to see their results.

I don't know what went wrong. Only thing is, they are trying to be everywhere.

I don't know. Their core strength was flow control, etc., but now they are trying to be everywhere.

Their employee cost has gone up exceptionally. I don't know.

Rajesh ji, you are sitting in the Calcutta. I thought you will give us some feedback what's going on.

No, I think that industry structure can change quite a bit if IFGL scales down or whatever is what I was thinking.

With jokes aside, I think you need to ask them, not us, because you can ask us about 4PRO, about our margins, we will be able to explain this better. Hopefully

That's why I start with we love IFGL, so as the management, they are all friends.

Great. That's all the comment we have.

No issues, sir. Congratulations once again on your numbers.

Thank you so much, Rajesh

ji.

Thank you very much, dear investors, shareholders, analysts, for your continuous support. Keep guiding us.

Keep asking us, sometimes not so comfortable questions so that we are more agile, we are more prepared, and keep on pushing us. We love to be under a bit of pressure to deliver good results.

I can assure you at RHI Magnesita India Limited, we are trying our best to further improve the results, further improve the performance, and the investors should get their due benefits by investing in this company, which is having a very strong fundamental, and in coming days, it will further improve. Thank you very much for this call and your trust on us.

Have a good day.