SUMCO Corporation

SUMCO Corporation

10.42
EUR
+0.16
(+1.56%)
-0.41EPS
7.52BMarket Cap
Feb 11Next Earn

Q3 FY2026 · Earnings Call TranscriptNovember 11, 2026

Operator

Thank you for your participation today. This is the results briefing for the third quarter of the fiscal year ending December 2026.

Before starting the presentation, allow me to confirm today's materials which consist of four items: the consolidated financial results for the nine months ended September 30, 2026; the announcement concerning difference between forecast and actual figures for the nine months ended September 30, 2026; the announcement regarding revision to dividend forecast; and the presentation deck entitled Result for Q3 Fiscal 2026. Next, a disclaimer.

The estimates, expectations, forecasts, and other future information discussed here and shown in today's materials were prepared based on the information available to the company as of today, and on certain assumptions and qualifications including our subjective judgment. Actual financial performance or results may differ substantially from the future information contained in this material due to risk factors including domestic and global economic conditions, trends in the semiconductor market, and foreign exchange rates.

We will have presentations today from Representative Director and President Jiro Ryuta, and Representative Director and Vice President, CFO Shin-ichi Kubozoe. President Ryuta will discuss our forecast and operating environment, to be followed by an explanation of the financial results by CFO Kubozoe.

We have set aside time for a Q&A session as well. I will now hand over to President Ryuta.

Jiro Ryuta

I am President Ryuta. I will start with an overview of the results for the third quarter of 2026.

In Q3 2026, SUMCO reported sales of 117.5 billion yen, operating profit of 2 billion yen, ordinary profit of 2.3 billion yen, and net profit attributable to owners of the parent of 5.4 billion yen. The EBITDA margin was 29.8%.

For Q4, we project sales of 107 billion yen, operating profit of 1 billion yen, ordinary profit of 4.5 billion yen, net profit attributable to owners of the parent of 4 billion yen, and an EBITDA margin of 30%. I will also comment on the reclassification of consolidated subsidiary Formosa SUMCO Technology Corporation, hereafter FST.

As we announced on August 27, 2026, we sold a portion of our stake in FST, resulting in the reclassification from a consolidated subsidiary to an equity method affiliate. With regard to the accounting treatment associated with this reclassification, FST is now treated as an equity method affiliate with September 30, 2026, the end of the third quarter of the fiscal year ending December 31, 2026, as the effective date of the reclassification.

Consequently, FST's sales and operating income is not included in our forecast from Q4 2026 onward. Next page, please.

This slide covers shareholder returns. We have set the interim dividend for fiscal 2026 at 10 yen.

With regard to our guidance for the fiscal year-end dividend, we have taken a comprehensive view, factoring in the level of expected profits for the fiscal year, the outlook for the next fiscal year and beyond, cash needs such as for capex, free cash flow, EBITDA, and the level of funds available for dividends in determining our guidance of 10 yen per share. This brings the annual DPS to 20 yen for an aggregate dividend payment of 7 billion yen.

Next page, please. With regard to the market environment, this slide shows the trends for 300 wafer shipments.

The solid red dotted line at the top represents Q1, Q2, and 3 for the current fiscal year. We started the year with Q1 only slightly below the Q4 2025 level, which is the solid black diamond on the far right, and have subsequently seen sharp increases in both Q2 and Q3.

We don't have full visibility for Q4 yet, but in any case, we can say that this year is shaping up to be a better year than 2025. For 200, which is again depicted by the solid red dots, Q2 and Q3 shipments are up from the Q1 start, which was at slightly less than 4 million wafers per month.

I think Q4 conditions are likely to be similar, although we don't have full visibility yet. Next page, please.

This is estimated customer wafer inventory for 300 wafers. There has been a clear decline in both customer inventory levels and inventory months in Q1, Q2, and Q3.

I believe conditions are improving. Next page, please.

Here we show estimated customer wafer inventory split between logic and memory. Logic inventory levels and inventory months have been clearly falling in Q1, Q2, and Q3 of this year.

For memory, although inventory levels are generally trending down, it isn't the case that inventory is falling sharply across the board. There are differences by customer, with some suggestion that there may be some memory customers that are actually shifting to maintaining wafer inventory levels in the belief that wafer supply may be difficult.

Next page, please. As I have noted today, in Q3 2026, 300 shipment volumes increased significantly on the back of strong continued demand for leading-edge logic and memory.

200 wafers also reported a pickup in shipment volumes on power device demand related to AI. On prices, LTA prices continued to be honored in Q3.

Our view for Q4 2026 is as follows. For 300 volume, we expect strong demand to continue, driven by AI.

We are now on the verge of a situation where we cannot keep pace with the volumes requested by our customers. For 200 volumes, given the rising demand, we expect volumes to exceed our current supply capacity.

In terms of prices for additional incremental demand, our plan is to take into account long-term relationships and prices in working with customers. Looking out further, for the semiconductor market, we expect to see continued strong growth led by the new application of AI.

For the silicon wafer market, we expect strong 300 wafer demand for AI and data center related leading-edge logic and memory to continue. However, we cannot justify capacity expansion investments based on current wafer prices and taking into account inflation.

Moreover, even if we were to hypothetically commit to capacity expansion investments, it would take several years for new capacity to come online. As such, we expect supply-demand to tighten further.

For 200 as well, we expect demand will continue to exceed the current supply capacity. Next page, please.

Moving on, AI and data center applications are driving 300 wafer demand. I would like to delve into why this is the case.

Computing capacity volume for training is rising on the back of efforts to boost AI performance. There is a need to increase computing capacity in order to enable more sophisticated training.

This is reflected in the blue part of the graph shown here. Increased take-up of agentic AI is also pushing up computing capacity requirements for inference.

This is also expected to lead to significant increases in computing capacity going forward. As well, growth in AI server volumes is driving overall growth in server volumes.

AI servers use high-performance leading-edge logic, driving an increased need for leading-edge logic use wafers. The graph on the right depicts the outlook for server shipments.

There is data showing that growth in AI servers for inference is projected to be particularly strong. Next slide, please.

On this slide, we show the typical leading-edge logic configuration for AI servers. The driver to this point has been GPUs, primarily from NVIDIA, but recently, the massive parallel processing that is required for AI training and inference has led to rising requirements for CPUs to be used to control the overall server systems.

As a result, both GPUs and CPUs are now fabricated using the optimal process generation for each function and then combined. Next slide, please.

This slide looks at demand for 300 wafers used in server-use logic. Increased demand for GPU and CPU chiplets is driving growth in demand for logic-use wafers across a wide range of process generations.

As shown in this graph, demand for leading-edge use wafers is continuing to grow. In response to the strong growth, SUMCO is working to upgrade our existing manufacturing facilities to better meet demand for leading-edge wafers.

Shin-ichi Kubozoe

I, Kubozoe, will present an overview of the results and Q4 forecast. Next page, please.

The third column from the right shows Q3 results. FST was reclassified as an equity method affiliate as of September 30th, the results here up to Q3 include FST's contributions as usual up to this point.

Q3 sales were 117.5 billion yen. Operating profit was 2 billion yen.

Non-operating income was a positive 0.3 billion yen, reflecting the receipt of subsidies during the quarter. Ordinary profit was therefore 2.3 billion yen.

We also generated extraordinary profits from the sale of FST shares to FST, but incurred extraordinary losses related to the planned halting of production at the Miyazaki wafer plant at the end of December. The losses include severance packages which we are now able to estimate as the number of employees choosing to take severance has been largely established.

There will also be extraordinary losses related to the disposal of inventory and expected costs of soil remediation and other things related to deconstruction of the site. Total extraordinary losses in Q3 were 3.7 billion yen.

The figure for corporate income tax is slightly higher than usual, reflecting an accrual for the taxes due on the sale of shares. The resulting net profit attributable to owners of the parent was 5.4 billion yen.

We were able to return to the black at the operating profit level in Q3. Q3 capex on an acceptance basis was 10.3 billion yen, for a nine-month cumulative figure of 29.7 billion yen.

We have already passed the peak for capex. This represents a level that is around 40 billion yen less than last year's nine-month level.

In contrast, reflecting the ramp-up at the new plant, depreciation has been rising sequentially. Q3 depreciation was 34.8 billion yen, while the cumulative nine-month depreciation was 99.2 billion yen.

Next page, please. This is the analysis of change to operating profit.

Starting on the left, in the analysis of sequential changes to quarterly operating profit, Q3 sales grew 3.9 billion yen Q-on-Q and operating profit improved by 3.1 billion yen. The yen weakened by 1.1 yen Q-on-Q from Q2 to Q3.

We show the waterfall chart for the 3.1 billion yen Q-on-Q increase in OP. As you can see, forex impact was a positive of around 0.5 billion yen.

On the far left, under cost, there was a deterioration of around 3 billion yen, mainly due to increases in electricity and labor costs. In the summer months, the unit price for electric power is set at a higher level, but unit prices were also pushed up as a result of the conflict in the Middle East.

Labor costs were higher on the back of increased production volumes, resulting in labor costs related to expanded production levels. In total, costs were up Q-on-Q by around 3 billion yen.

Depreciation rose 1.4 billion yen Q-on-Q. There was a solid positive impact of around 7 billion yen from sales variance, reflecting not only the increase in volumes from Q2 to Q3, but an improved mix on a higher proportion of epitaxial wafers in Q3.

Additionally, we will be conducting regular maintenance at our main-stay plant in Q4 and were therefore building up inventory ahead of this. The strong positive from sales variance contributed to the Q-on-Q improvement in OP.

We show the year-on-year change for the nine-month results on the right. Sales rose 28.1 billion yen year-on-year, while OP fell 10.1 billion yen.

The change in the forex rate was around 10 yen year-on-year, resulting in a positive contribution of 11 billion yen from forex, as shown in the waterfall chart below. On the left of the waterfall chart, costs increased 7 billion yen year-on-year.

The trend is generally similar to the Q-on-Q trend I explained earlier, but it reflects higher unit costs for labor, energy, and materials. Electric power costs were also up on the impact of net-zero related costs, which has been rising this year, bringing the year-on-year cost impact to around 7 billion yen.

The increase in depreciation above the line was 15.7 billion yen. The contribution from sales variance was a positive 1.7 billion yen, which looks low even excluding the increase in sales and the forex impact.

It reflects the lingering impact of inventory adjustments in general-purpose logic at the beginning of the year, which resulted in mix deterioration due to a higher proportion of polished wafers, depressing sales variance contribution. Next page, please.

Moving on to the balance sheet, we have excluded the impact of FST from the balance sheet as of the end of September. As a result, the balance sheet is significantly smaller.

For instance, total assets went from 1 trillion 127.9 billion yen as of the end of December 2025 to 924.3 billion yen as of the end of September, down roughly 200 billion yen. There were puts and takes in various line items on the balance sheet, but the main reason for the smaller balance sheet is the exclusion of FST.

Cash and deposits increased by 45.5 billion yen. I will discuss the change in cash and deposits in covering cash flow on the right in a moment.

Tangible and intangible assets declined from 670 billion yen as of the end of last December to roughly 400 billion yen. The decline reflects the exclusion of FST, as well as the significant increase in depreciation versus a low level of capex on an acceptance basis, which led to a drop in tangible assets.

The combined decline in tangible and intangible assets was around 270 billion yen. In contrast, others increased as a result of FST's reclassification.

The remaining holding in FST is included under investment securities, contributing to an increase. Interest-bearing debt also declined around 100 billion yen, mainly due to the reclassification of FST.

Other net assets in the capital account includes non-controlling interest, which is also down. There was a significant impact from the reclassification of FST.

The equity-to-asset ratio was 61.2%. The D/E ratio on a gross basis was 0.44 times and on a net basis 0.23 times as of the end of September.

As you can see, there has been an improvement in these metrics. On the right, we show cash flow.

Operating cash flow was a positive 77 billion yen. Cash flow for investment activities reflects a very low capex outlay of roughly 30 billion yen.

As a result, free cash flow was significantly higher at a positive 48 billion yen. In terms of the use of cash, there was an outflow of cash for dividends paid.

With regard to debt, we have transitioned to debt repayment mode, resulting in reductions to debt. Therefore, the net positives from operating cash flow and free cash flow contributed to the increase in cash and deposits.

We show our earnings forecasts on the next page. You can see our Q4 forecasts in the third column from the right.

The figures from Q4 onward do not include FST, which has implications for Q-on-Q comparisons. Please bear this in mind.

We project sales of 107 billion yen and operating income of 1 billion yen. This represents the second consecutive quarter of operating profits.

On non-operating gains and losses, we expect to receive subsidies again in Q4 for a positive of 3.5 billion yen. We project ordinary income of 4.5 billion yen and net profit attributable to owners of the parent of 4 billion yen.

Q4 depreciation, as mentioned earlier, does not include figures for FST, which makes a direct comparison to Q3 difficult. Our projection is 32.2 billion yen.

Full-year cumulative depreciation is forecast to be around 131.4 billion yen. This represents a year-on-year increase of around 16 billion yen.

As we have stated thus far, we expect 2026 to be the peak for depreciation. Lower on the table, the EBITDA margin is projected to revert to the 30% level, up from the 29.8% of Q3.

Next slide, please. On this slide, we show the analysis of change in operating income.

On the left, we show the sequential changes. Q4 sales are projected to fall 10.5 billion yen Q-on-Q.

Operating profit is projected to decline by 1 billion yen from Q3's 2 billion yen. Our forex assumption is 160 yen, a slight strengthening of 1 yen Q-on-Q.

FST figures were included in the consolidated accounts in Q3, but FST sales and OP are not included from Q4. If we exclude the impact of the absence of FST, then we assume Q4 sales would be up around 6 to 7 billion yen.

In terms of profits, from Q4, FST's contribution as an equity method affiliate will be reflected in non-operating income. The absence of FST will impact Q4 OP.

Please refer to the footnote on the bottom left. We have included the sequential impact of FST's exclusion from consolidation in the fourth quarter in costs and others on the left in the waterfall chart.

As you can see, we are projecting a sequential negative of 1.4 billion yen from costs in Q4. The vast majority reflects the impact of FST's reclassification.

While there are other puts and takes under costs, they effectively offset each other. We expect depreciation to increase by 2.5 billion yen Q-on-Q.

Excluding the impact from the deconsolidation of FST, sales variance is expected to be a positive 3 billion yen. Putting it all together, the ongoing increase in depreciation results in a slight decline in Q4 OP.

That said, this marks the second consecutive quarter in the black at the operating profit level. On the right, we show the year-on-year changes for the full year.

On a full-year basis, FST only contributes to nine out of the 12 months, which impacts the year-on-year comparability, but we project an increase of around 30 billion yen in sales, but a 4.6 billion yen decline in OP. Looking at the waterfall chart below, with regard to costs, as mentioned earlier, the key factors are projected increases in unit prices for energy and materials, as well as increased labor costs reflecting higher production volumes.

Depreciation is also projected to be higher. That said, we expect a positive contribution from sales variance, mainly reflecting the increase in volumes in second half.

As well, the depreciation of the yen on a year-on-year basis should also result in a positive contribution, but operating profit is expected to fall slightly short of the previous year. This next page shows the trends in key metrics.

I reiterate that FST revenue drops out in Q4, leading to a Q-on-Q decline. Specific figures for FST will be disclosed by FST when they announce their results on November 12th.

Please refer to their disclosures which will become available tomorrow. This completes my section of the presentation.

Thank you.

Operator

Thank you. We will now open the floor to questions.

We will start with Mr. Enomoto.

Mr. Enomoto

I am Enomoto of BofA Securities. I would like to ask about your policy for entering into next round of LTAs.

This is something that I think is clearly revealed by the recent results. Costs rose 12.8 billion yen, but were offset by forex impact of 13.3 billion yen.

In the last round of LTAs, SUMCO was effectively unable to fully mitigate the impact of higher costs, and frankly, I have a sense that if it weren't for the favorable tailwind of the weaker yen, it would have been worse. I expect that you will be looking to put LTAs in place next time.

Please talk about how you are thinking about coping with cost inflation and forex risk, as well as the tenor of LTAs in the next round of LTAs.

Shin-ichi Kubozoe

We will certainly review the situation for the current LTAs, taking into account the issues of inflation, the appropriate tenor, or forex impact for LTAs going forward. We will need to think about the appropriate terms and conditions for individual customers in considering how we should incorporate these elements in negotiating future LTAs.

We will give serious consideration to these issues given the expected continuation of inflation and the potential for the scale of such risks to increase. As much as possible, we want to minimize such risks.

We will need to think about how to set up contracts to do this going forward. It is not something that can be done in a rush.

We must give due consideration to these factors as we engage with our customers individually.

Mr. Enomoto

What are you thinking about in terms of contract tenors?

Shin-ichi Kubozoe

With regard to tenors, at the moment, customers probably want to get wafers early and lock in for longer, but that is not the case for us. For us, we would hope to put LTAs in place when the timing is favorable in our view, and for an appropriate period of time.

For us, our preference would be for a contract length that represents the best choice at that time. That would be a function of our relationship with each individual customer, including what sort of product they are looking for, it would not be a cookie-cutter approach.

I think we will be thinking about what is the best arrangement for each individual customer.

Mr. Enomoto

Understood. I have high expectations for SUMCO.

Thank you.

Shin-ichi Kubozoe

Thank you.

Operator

Thank you. Next is Mr.

Ikeda.

Mr. Ikeda

I am Ikeda of Goldman Sachs Securities. My question is about existing contracts and spot or short-term contracts.

You have contracts that SUMCO signed in around 2021 that were to run to 2026, but that have been extended to the end of 2027 or 2028. However, recent demand in 2026 has been very strong.

Is there a possibility that the LTAs where the end date was pushed out could get pulled in somewhat? I think the volume that got pushed out is significant.

Based on this, when thinking about shipments for 300 in 2027, roughly, what would be the breakdown of the following: volume from ongoing existing LTAs where prices will remain unchanged; volume of new contracts as a result of the expiry of existing contracts at the end of 2026; and the volume that would be incremental to the existing contracted volume? If that is too much, an image of the breakdown for first half 2027 would be okay.

If you look at data out of Taiwan and other areas, it suggests 2027 memory-use polished wafers is 40 to 50% and logic is 15 to 25%. The German player has also made reference to significant price increases in talking about polished wafers for memory.

Given this, it seems that prices of wafers for memory, either spot or short-term contracts, are likely to rise significantly, in my opinion. Do you have a similar view?

How should we think about this?

Shin-ichi Kubozoe

We are not in a position to comment on what other players have said. I can't really respond to this.

With regard to your first question, demand at the moment is very strong. We are entering a situation where even we are not able to fully respond to demand.

In terms of determining which customers and what volume, it would be a function of how we think about existing LTAs. We are currently in the midst of considering many different things.

You touched upon overall balance. This is something we are grappling with now, and addressing it is not easy.

You said even an indication for first half 2027, but this is precisely what we are wrestling with at the moment. For us, what we consider important is our relationships with individual customers, and within that, a consideration of achieving the optimal balance of production.

We are trying to arrive at the best choice in terms of reaping price benefits right now.

Mr. Ikeda

I have one follow-up question. With demand running ahead on a daily basis, I think it must be challenging to reach agreements, but do you think you will have more visibility by the end of the calendar year?

If so, I believe that there will be serious volume shortages next year, which will mean prices need to go up. I suspect that customers are competing to lock in supply.

Is this the kind of market situation we should expect for next year?

Shin-ichi Kubozoe

I think the situation is likely to be very challenging, as you have described. I think from first half of 2027, we will be in a situation where we will need to make difficult choices about what to do.

I think we are headed for the kind of situation you have described, and that it is already starting to happen. We are now thinking about how we should respond.

Mr. Ikeda

Understood. I have high expectations for SUMCO.

Thank you.

Operator

Thank you. Next is Mr.

Umebayashi.

Mr. Umebayashi

I am Umebayashi of Daiwa Securities. Thank you for the presentation.

My question is on the short term, and is about how to think about production capacity and sales. On the sequential increase in sales in Q4, if we exclude the impact of FST, I think you are assuming sales growth of around 6 to 7%.

I believe that some of those sales will come from the inventory you built up in Q3. As such, am I correct in assuming that the actual production volume itself will not be up that much?

With regard to capex, on page 13 of the presentation, you state SUMCO will work to upgrade existing manufacturing equipment to better meet demand for leading-edge wafers as high growth continues. This message is unchanged from the previous quarter's presentation.

Would I be correct in assuming that your stance is that any capacity increase is unlikely to be dramatically higher since your focus is primarily on modernization of existing facilities?

Jiro Ryuta

Basically, we will focus mainly on modernization of existing facilities to support demand for leading-edge wafers. Within this, we will use AI and other tools to improve productivity gradually over time.

This is what we are currently doing.

Shin-ichi Kubozoe

On your question about the sequential trend in production and sales volumes for Q4, we are undertaking regular maintenance at our main-stay plant in Q4. However, we are doing our best to produce more volume at each of our plants to respond to customer demand, despite the regular maintenance work.

We will be tapping into inventory to a certain extent, but we are trying to increase our sales volume even if it may only be a slight increase. The increase in production should increase generally in line with the expected increase in sales.

Mr. Umebayashi

Understood. Thank you.

One thing, I would like to correct what I said earlier. I had suggested effective growth of 6 to 7%, but I think it may be better to expect effective growth of around 5%.

Thank you.

Operator

Next is Mr. Yoshida.

Mr. Yoshida

I am Yoshida of CLSA Securities. I also would like to ask about how to think about pricing for the next round of LTAs.

In the two previous rounds, generally, I think that there was a broad resetting of the blended ASP. This time, it sounds like you will be taking more of a pinpoint approach by setting prices that will lead the market in negotiating with the customers that are asking you to increase capacity.

Is that correct? Also, when I look at customer inventory for logic on slide 9, it has fallen sharply.

Given the current environment, I suspect that wafer inventory is improving not only for leading-edge, but mature nodes as well, on the back of improvements in capacity utilization. From this standpoint, I think that many more customers in the broader market are increasingly serious about LTAs.

Could you also comment on what is happening with customers?

Shin-ichi Kubozoe

There is a broad range of customers who feel that they are not getting enough wafers. There are also many customers who feel that the tightness in wafers is impacting a range of nodes.

Rather than a pinpoint situation for a limited number of players, there are many customers who expect future supply is likely to tighten. We are hearing from many customers.

For us, rather than setting a price point to lead the market with a specific customer, we believe it is necessary to improve overall prices even if we do choose to do LTAs. On your point about estimated customer inventory, in the beginning of the year, there was an inventory adjustment in wafers used for general-purpose logic, as we had previously noted.

However, as you alluded to in your question, what we are seeing now is a gradual pickup in demand in this area. I think it may well be that customers in this area are making progress in working down wafer inventory.

Mr. Yoshida

Understood. Thank you.

Operator

Thank you. Next is Mr.

Nishiyama.

Mr. Nishiyama

I am Nishiyama of Citigroup Securities. My question is about your EBITDA margin.

The previous peak was 40%. You are currently at 30%.

In terms of 300 shipments, we are at peak levels, why have margins not come back? What level are you targeting?

If the reason that margins have not gotten back to the previous peak is because of factors other than depreciation, is it mainly cost inflation? If you are aiming for an EBITDA margin of around 40%, do you need to raise prices just to pass along the cost increases you have seen over the last few years, even without hypothetically expanding capacity?

I would think that you would need to raise prices significantly, but how are you thinking about this?

Shin-ichi Kubozoe

At the time of the last peak, which I think was probably 2022, we were not experiencing significant cost push pressures, but were operating at full capacity utilization. As you mentioned, we have subsequently seen costs rise, with regard to prices, we believe that the current price level is inadequate, and that we would need to set prices to take into account the cost increases to date as well as the expected future increases.

In terms of a specific target for EBITDA margin, there isn't anything I can say at this time, but we always feel that we must work to improve margins. To do so, improving selling prices is one choice, but there are also measures we could consider on the cost side or production side.

We believe it is necessary to tackle the challenge of improving margins from the perspective of both selling prices as well as the cost side. I don't have a specific numerical target, but we would like to, as much as possible, get closer to levels that we have achieved in the past.

Mr. Nishiyama

Understood. Thank you.

Operator

Thank you. Next is Mr.

Nishihara.

Mr. Nishihara

I am Nishihara of Okasan Securities. I have a simple question.

What is the correct image for full-year depreciation for the next fiscal year? Is 90 billion yen the right image?

To the extent you can comment, what is your current assumption in numerical terms?

Shin-ichi Kubozoe

What we can and have been saying is that we expect depreciation to decline by several tens of billions of yen. The projected drop is more specifically in the lower end of the range, it isn't that high a number.

Mr. Nishihara

Is 90 billion yen not in the ballpark?

Shin-ichi Kubozoe

What I can say is that the figures for this year include a nine-month contribution from FST. We expect a decline of several tens of billions of yen from this year's depreciation excluding FST.

Mr. Nishihara

I see. Understood.

Thank you.

Shin-ichi Kubozoe

I apologize for the inadequate explanation.

Mr. Nishihara

Not at all. Thank you.

Operator

Thank you. Next is Mr.

Miyamoto.

Mr. Miyamoto

I am Miyamoto of SMBC Nikko Securities. I just want to confirm the last point on depreciation.

You said that depreciation would be several tens of billion less than this year's figure excluding the nine-month contribution from FST. Is that right?

Shin-ichi Kubozoe

Yes. Our current full-year assumption is 131.4 billion yen.

This includes nine months of depreciation for FST. FST will announce its Q3 results tomorrow, I would expect they will disclose their nine-month depreciation.

Adjusting for FST, you can then extrapolate our depreciation for the full year on a stand-alone basis. Next year, we expect depreciation to be several tens of billions lower than the stand-alone figure.

Mr. Miyamoto

Understood. My question is a simple question about 200 wafers.

Your peer has said that with 200, wafer production is running close to full capacity and that they are considering adding back some headcount to effectively increase capacity. Is SUMCO also considering re-staffing for production or other measures?

Also, it appears that the impact of the fire at a Taiwanese player will persist. Are you seeing an increase in your 200 share as a result?

Please comment on your strategy for 200.

Jiro Ryuta

With regard to 200, demand has picked up a little recently, we would like to do as much as possible to respond to customer demand. However, we are struggling to recruit human resources at the moment, given tight conditions.

That said, we are not considering restarting facilities, but are thinking about possibly adding headcount to raise capacity utilization at facilities that are currently operational.

Mr. Miyamoto

How about the impact of the fire at one of your competitors on SUMCO?

Shin-ichi Kubozoe

It is difficult to comment as I can't really talk about it or issues that impact specific customers. However, we do understand that there continues to be an impact, and we have received some inquiries.

Mr. Miyamoto

Understood. Thank you.

Operator

Thank you. Next is Mr.

Bahn.

Mr. Bahn

I am Bahn of Nomura Securities. I would like to ask about capital policy.

I am looking at page 17 of the presentation. As a result of reclassifying FST, you have been able to reduce interest-bearing debt, and it appears free cash flow will significantly improve this year and next year.

I expect your financial soundness to improve. How might this change how you think about shareholder returns?

Also, hypothetically, if you decide to move forward with the next round of LTAs, I think this would have implications for your financial position. Would you consider the adoption of upfront payments or deposits for LTAs?

How would you incorporate this into the contracts? Any color you can provide would be helpful.

Shin-ichi Kubozoe

On shareholder returns, we would need to take a look at our profitability next year. If we felt it will improve, then we would consider as appropriate.

For now, however, with the reclassification of FST, interest-bearing debt is 250 billion yen, which is still high relative to previous levels. Because of this, we might prefer to reduce interest-bearing debt a little further.

On your second question about LTAs and possible payment conditions, I think there are many different ways we could choose to approach this. With regard to this and other considerations for LTAs, such as price, contract period, cost inflation, and others, there is a need to take a multifaceted approach in looking at the various alternatives.

We would like to explore the various choices as we engage with our customers. What you have suggested is included in the various things we are considering.

Mr. Bahn

Understood. Thank you.

Operator

We will end the meeting here. Thank you to everyone for joining the Q3 fiscal 2026 results briefing.

We are grateful for your participation today.