SSAB AB Class A

SSAB AB Class A

91.30
SEK
-1.60
(-1.72%)
5.70EPS
17.99P/E
102.10BMarket Cap
Jan 28Next Earn

Q3 FY2026 · Earnings Call TranscriptOctober 28, 2026

Per Hillström

"type": "audio", "format": "mp3", "data": "part_0" } Per Hillström (Head of Investor Relations): Good morning, and welcome to the presentation of the SSAB Q3 report. My name is Per Hillström.

I'm Head of Investor Relations at SSAB. Presenting today, we have our President and CEO Johnny Sjöström, and also our CFO Leena Craelius.

The agenda: Johnny will start by going through the quarter in brief. Leena will present more details on the financials.

Then Johnny will close up with outlook and a summary. After that, we will open up for questions.

By that, Johnny, please start.

Johnny Sjöström

Thank you very much, Per. Good morning to all of you.

I'd like to summarize the Q3, and I will, as usual, start with health and safety. As you can see on the graph to the left, that we have a good trend where our lost time injury frequency is continuing to go down, a remarkable work by the whole organization changing the culture related to safety.

I also want to point out the total recordable is at 4.8, which is record low for SSAB, an area we will continue to work on and try to strengthen as we move forward. Then when we look at our financial performance, you can see that Q3 ended up on 3.3 billion Swedish krona, which is better than Q3 last year, somewhat lower than Q2, but we have to remember that Q3 is a typical maintenance quarter, and especially for Americas, the financial performance was held down because of the maintenance, but I will come back to that later on in this presentation.

I would also like to point out that we were able to grow our shipments even further within the advanced high-strength steel going into automotive, but as well as within special steels. Those are things that I want to highlight.

If you look at our net cash position, and I guess that Leena will comment on that later on in her part of the presentation, we still have a very good and stable balance sheet, a very strong net cash position. Now, a few comments on our investment program.

The conversion or the transformation in Oxelösund where we are replacing our blast furnace with an electric arc furnace is progressing really well. We are planning for production start-up in Q2 next year, it's actually around the corner.

Then we also have the work in Luleå with the mini-mill, or what I would like to refer to as the mega-mill. It remains on time and budget, but what I also want to highlight that with projects of this size, there are a lot of things that is challenging, and we have had some issues in the beginning of the project, things that we couldn't foresee, and with projects at this size, there are things that will always come up that we couldn't really prepare ourselves for.

I also want to point out that this investment is extremely important for the future of SSAB. It is in line with our strategy to accelerate our premium leadership, and it's products that goes directly into automotive industry, especially for the electrical vehicles to help them to become lighter, which is a requirement from the market.

Then of course, we also had a ground-breaking ceremony a few weeks ago in Oxelösund. It was a new quenching line that we are planning to construct.

That's going to give us more capacity to produce the most advanced quench and tempered material within Special Steels. We have a very strong underlying demand from the defense industry and the mining industry, it's important for us in order to grow with customer demand.

Also we're expanding the capacity to be able to produce more powder for additive manufacturing. Now if we go into the divisions, we can see that the shipments within Special Steels were higher than they were Q3 last year, so that's a very good thing.

We could also see that the prices were higher than they were Q2 this year. Both shipments and prices are good, but then if you look at the profitability, you might wonder why the profitability is lower than Q3 last year.

That's mainly related to cost increases we've seen in alloys, transportation, and to some extent in natural gas, etc. That has been sort of offsetting.

We're not super concerned about this. We know that our prices are going to continue to go up.

There is a delay, and for Special Steels an even longer delay than there is for other divisions, we know that the price increases will offset sort of the cost increases going forward. I think it's still a very stable performance by Special Steels.

There's a very strong underlying demand, I'm very optimistic for the future. Now looking at SSAB Europe, the shipments came out on a higher level than they were Q3 last year, and especially I'm very happy with the amount of premium steels that we're selling, which I commented on in the beginning, the advanced high-strength steels that goes into automotive industry, automotive industry that is shrinking on the European market, but still we're able to grow on a shrinking market, it shows that we have a very good competitive advantage and that we create unique customer value.

Prices have been increasing for SSAB Europe, and we came out on a decent financial performance. We have to remember that in Q3 we also have maintenance that's affecting the costs, but as well as affecting the deliveries.

I think still a decent performance. Then if you look at SSAB Americas, volumes came out pretty much in line with what it was Q3 last year, a stable performance.

For those of you who are following the CRU prices, you can see that the steel prices have been moving up very rapidly, and having in mind that we are the second-largest plate producer in the US market, a market with underlying demand is still very, very strong for heavy industry applications, energy, oil and gas, etc. We have a good combination of a lack of competition, but at the same time a strong underlying demand.

Our prices went up higher than we guided for. It was rough 8%.

We're not super surprised about that, but also have to remind you we have a delay because of the contract structure that we have. Even if the CRU prices are moving up, it's only 20% of what we sell in United States which are sold on spot.

There is a delay for us. Once again, if you compare our Q3 performance compared to Q3 last year, we have maintenance every other year, so that's the reason why we came out lower Q3 this year compared to Q3 last year, just worth pointing out.

Then we have the two subsidiaries. We have starting with Tibnor, where the shipments were somewhat lower or in line with Q3 last year, and then if you look at our financial performance, it was considerably stronger than it was last year, but then again Tibnor's benefiting for prices going up and that also has an impact on their inventory, so that's on the positive side.

If you look at Ruukki Construction, we haven't really seen an improvement in the construction segment. They are still working on a low-demand situation in the market.

Still, the revenues are very much in line with what it has been in the past. I think that they came out on a decent level when it comes to the financial performance, higher than it was last year and also higher than Q2, but they are not having the same benefit from the inventory revaluation.

With that, Leena, I leave the word over to you.

Leena Craelius

Thank you, Johnny. A bit more details and also Johnny mentioned few things that I'm going to repeat here, but as the headline is saying, improved earnings versus Q3 last year, all the graphs are illustrating improvement in shipments, revenue, and profitability.

Let's begin with shipments, Q3 outcome 1,530 kilotons, clear improvement compared to previous year by 64 kilotons and 4%, and the seasonality, as already mentioned, with the maintenance outages is showing that the reduction compared to Q2 was 230 kilotons and 13%. We were guiding significantly lower shipments in Special Steels and Europe, as well as lower in Americas, and this was in line with the guidance.

Then if we look at the revenue, 25.6 billion, reduction compared to Q2 1.9 billion and 7%. When shipments are going down 13% and revenue only 7%, it's indicating that the prices did develop upwards during Q3.

EBITDA performance in relative terms stable, 13% year-on-year, but in absolute terms we have seen or we can see the improvement 0.4 billion, as we can see improvement in the EBITDA per ton performance. Then a bit more detailed analysis, bridge analysis comparing operating result Q3 versus previous quarter.

Seasonality already mentioned, but the good performance with prices, the biggest increase took place in Americas by 8%, and then Special Steels and Europe division increasing prices by 3%. Both Ruukki Construction and Tibnor also increased their prices.

Only minor impact here with the positive FX that was only impacting 2%. Volumes lower, already mentioned seasonality.

Europe division 160 kilotons lower, Special Steels 44, and Americas 27 kilotons lower. As already mentioned, maintenance impacting this.

Variable cost, here we see an increase, and here a bit sort of a diverse development. In Europe division, we have seen that the pellet premium has started to climb up.

We have higher logistics and zinc and paint cost. In Americas, majority of this negative impact is related to change in inventory.

Inventories came down during the maintenance outage, and in Special Steels already mentioned, here we had higher iron ore, coal, alloys, and logistics costs, while the scrap cost was slightly lower in Alabama. Fixed cost, positive impact seasonally always Q3 tends to be such.

We have lower personnel and external services cost. Then the capacity utilization, yes, related to maintenance outages.

We didn't have any outages during Q2 as we did during Q3, the crude steel and rolling production was around 10% lower quarter-on-quarter. Then a comparison against previous year, and here we can see the improvement in the profitability performance.

Prices have developed upwards, and here the biggest increase took place in Americas by 12% year-on-year, contributing 590 million to this positive EBIT impact, then followed by both Special Steels and Europe division, where prices went up 4% and impacting both divisions where contributing 330 million SEK here. Also Ruukki Construction and Tibnor have succeeded to increase prices.

Shipment volumes also positive impact by 64 kilotons, and here Special Steel division has increased by 8%, followed by Europe division 4%, while as Johnny already referred to, Americas was rather stable year-on-year. Also to point out that Ruukki Construction and Tibnor, they were somewhat lower in their volumes year-on-year.

Variable cost also negative impact in this comparison, especially with Americas with higher maintenance-related costs, and also higher scrap cost is contributing a big part of this. In Special Steels, we have seen higher alloys, CO2 emission allowance cost, and logistic cost, and then in Europe also higher CO2 cost, alloys, zinc, and logistics.

Fixed cost, minor negative impact here. We have some higher personal-related cost and higher external services and also some higher rental cost.

Capacity utilization with positive impact, and this is mainly seen in Europe division, where we have around 15% higher crude steel and rolling production. To remind that last year, we had more extensive maintenance outages in Luleå compared to the maintenance outages this year.

If we then continue with the cash flow, if we compare Q3 this year versus previous year, very similar trend when it comes to EBITDA performance, higher this year compared to last year, similar trend in change in working capital, positive impact, even better than last year. Maintenance-related capex was fairly stable and similar compared to last year.

To remind that this other item or line here is related to CO2 emissions spend that we are doing throughout the year. Then the strategic expenditures slightly higher compared to last year, and I will get back to the guidance later on.

All in all, good cash operating cash performance. This led to strong net cash position, 8.4 billion, which leads to the gearing -11%, which still very well in line with our financial guidance, plus/minus 20.

To remind that we did pay out the dividend during Q2, amounting to 2 billion. Raw materials, as the graph is illustrating, let's start with the iron ore has been rather stable throughout the year, but to point out that the pellet premium has been going up quarter by quarter, and we see that it continues to go up also during Q4.

Coking coal prices, as the graph is illustrating, have been developing upwards during the year, perhaps starting to move more sideways, but definitely this is impacting the cost of all the Nordic mills. Then the scrap cost also, illustrated in the graph, has been higher this year compared to last year.

It tends to be that towards year-end, the trend, as also last year shown, it tends to go upwards just before year-end. Perhaps to point out, which is not illustrated on this slide, we have seen rather significant increase in alloys cost during this year, zinc and paint cost, and of course the logistic cost has been going upwards.

Also to summarize the cost impact of CO2 emission allowances, on group level last year, the cost impact was around 600 million SEK, while this year the cost impact will be close to 2 billion. There is a significant increase in CO2 emission allowance cost, and mainly, of course, hitting the Europe division, and to some extent Special Steel division as well.

Maintenance cost, this table we have not updated since last time we were showing this. During Q3, the planned maintenance outages have been going according to plans, and to bear in mind that this will continue during Q4 in all steel divisions, and thus impacting the volumes as well as the cost.

Then the capex guidance, and this time we actually updated the guidance for this year. Previously we've been guiding for 13.5 billion, and we have reduced it for this year by 2 billion.

If we split this strategic capex 8.2, biggest portion is then related to Luleå, 4.2 billion, and Oxelösund just below 3, Alabama mill 0.3, and then the rest is split to other smaller strategic investments. To highlight that this update is related purely to the timing of the invoicing.

Then also no change in the net cash impact when it comes to CO2 emission allowances. We continue to purchase the allowances, and the estimate is that it will be on a similar level as last year, around 780 to 800 million SEK.

No change in the digital roadmap plans that we have around IT projects. We continue to spend around 200 million more compared to '25, so that continues to be same as previously communicated.

With this, I give it back to Johnny.

Johnny Sjöström

Thank you very much, Leena. I will give a short outlook and summary.

If we look at the global market for high-strength steel, and this is mainly related to Special Steels, we can see that their strongest segment, such as mining and protection, is still very, very strong. Roughly you can say that 50% of what Special Steels sells goes into rock moving or earthmoving in one way or another.

Mining is extremely important for Special Steels, and that segment is still very, very strong. Now protection is picking up, but it has a long lead time, and it's also an area or segment where we have lower volumes, but just a big demand.

If we look at the geographies, I think that if we talk about the overall plate market in Europe, it's very, very strong, and it's going to continue to be very, very strong. Of course, that has a positive impact as well on Special Steels.

The underlying demand for plate in Europe is not super strong, but the supply situation is very favorable. For Special Steels, we believe that it's going to continue to be strong.

Same thing with the US plate market. We see we are the second-largest plate supplier into the USA market.

Here we have a very strong underlying demand, segments such as energy, oil and gas, transmission towers, wind, heavy transport. All of those segments are going really well.

We see a large demand. Customers are concerned that they are not going to be able to get the availability that they need.

Here we have a very strong position, very optimistic. I think that the Section 232 and the melted and poured, it works in our favor.

We have now recently seen some imports starting to increase on plate, mainly from POSCO, but it shows that there's not enough availability on the American plate market, and prices have been moving up. Then if we take a look at the European steel market, the tariffs are and the CBAM is working in our favor.

I also want to point out that recently we've seen companies such as ArcelorMittal reopening up idle capacity. I think there is an additional 10 million ton of capacity coming online.

They have some production start-up issues, but once they're online, then that will sort of close the supply and demand gap on strip. If you look at the plate, there's no idle capacity to open up.

From that perspective, there's still a very strong demand and limited supply on the plate market in Europe. The construction segment, we don't see any improvements yet, unfortunately.

There are some infrastructure projects, but not to the extent that we were hoping for. I think the Nordic infrastructure market is quite strong, but the rest of Europe it's still very low activity.

The automotive industry, as you all know, has a challenging situation. Now we also can see a lot of Chinese car manufacturers settling down in Europe.

That, of course, will increase the demand of steel, because it most likely will be locally supplied steel, so that, of course, is beneficial for us. That pretty much summarizes it.

Now then if we go into the outlook and the guiding, if we look at Special Steels, we have guided for somewhat lower shipments, and that's mainly related to the maintenance that we're doing. The Oxelösund mill has a sort of a longer maintenance period now, and that will have an impact on the shipments.

Then prices, we guide for somewhat higher. The contract structure we have for Special Steel is normally longer-term contracts.

There's a long lead time for when we had the order intake price until we have an invoice price. If we look at SSAB Europe, we believe that the shipments will be higher.

Now I think that their bigger maintenance is over, they have the ability to increase the shipments compared to Q3. Here we also guide for a somewhat higher price situation.

Then we have SSAB Americas, where we believe we're going to be stable on the shipments, but we also guide for somewhat higher prices. I think that's probably the summary of the outlook and the guidance.

I think that we're getting closer to opening up for questions. Per, what do you think?

Oh, we have a summary, but we can skip that. Actually, I pretty much covered everything in my presentation, if there are any additional questions, we can take it during the calls instead.

Per Hillström

Indeed, thank you, Johnny, Leena. Then we're ready to go into the Q&A.

May I just suggest before we start that in the first round we limit to two questions each so we let as many as possible get the chance to ask questions. Please state them one at a time to facilitate the process here.

Please, Operator, present the instructions.

Operator

Thank you. As a reminder, to ask a question, you will need to press star one and one on your telephone and wait for your name to be announced.

To withdraw your question, please press star one and one again. We will now take the first question from the line of Kaleb Solomon from SEB.

Please go ahead.

Kaleb Solomon

Hi, and thank you for taking my questions. Maybe first on your Americas price guidance.

I appreciate there's a lag, and you explained that sort of gap between market prices and your realized prices mainly due to the contract structure with, I think you said, 20% being sold on spot. For the remaining 80%, can you give us a rough split between the sort of quarterly and longer-term contracts, just trying to understand how much pricing upside is still to come at the beginning of next year beyond what you guided for in Q4?

Leena Craelius

In Americas, we also have so-called annual contracts, which are then index priced, there is sort of a delay also when we are updating the prices according to index. Then, as you said, there is a combination of annual, quarterly contracts, and sort of a smaller part is something that is actually then reacting to prices more rapidly.

It is a mixture of all these different contract structures.

Johnny Sjöström

I would also like to add that we have a tendency to be a little bit conservative. We rather be safe than sorry, I think we had the same guidance in Q3, and you know where we ended up,

Kaleb Solomon

yeah. That's fair.

Thank you. On Special Steels, you shipped 9% more than last year and achieved higher prices, but earnings were still a bit lower.

I know you've highlighted sort of freight and energy costs and alloys, but can you give a rough sense of how much of that cost pressure you're able to recover through pricing and what the sort of timing of that is?

Johnny Sjöström

I can't give you any numbers, but we're quite optimistic, and we're not losing market share, we're not losing momentum, the demand is there, our prices are continuing to go up for Special Steels. Some of the cost increases that we could see in Q3 were slightly higher than we expected.

We don't believe that they're going to continue to go up at that pace, and our price increases are going to be higher than the cost increases. We're certain of that.

Then again, we're living in a world now where things are changing so fast, the war in the Middle East, we couldn't foresee that. We couldn't foresee that all of a sudden there was a freight limitation and the costs went up, several hundred percent, and just to be able to find a ship to ship it on.

This is more sensitive for Special Steels than it is for others, and that's also having an impact of other costs like alloys, etc., because they need to be transported quite often as well. This is the tricky part in the world we're living in right now that things are happening.

It's very unstable in that sense.

Kaleb Solomon

Thank you. That's clear.

That was two questions, I'll get back in line.

Operator

Thank you. We will now take the next question from the line of Adrian Gilani from ABG Sundal Collier.

Please go ahead.

Adrian Gilani

Yes, hello. I'll use my first question on Americas, where you seem to have taken the vast majority of your maintenance shutdown costs already in Q3, and you're saying you have strong end-market demand, but still you're only guiding for stable deliveries into Q4.

How come you don't expect deliveries to come up into Q4?

Leena Craelius

As I mentioned, the, of course, big portion of these Q3 deliveries were taken from inventory, and that also had the impact on the profitability on top of the maintenance cost. Thus we think that the shipment volumes will be relatively stable also for Q4.

As you said, there will be still continuing the maintenance outage activities during Q4, even though the majority of the cost related to that was impacting Q3. That is the reason for the stable.

Adrian Gilani

Understood. Then we saw some speculation just the other day about the US and Canada being in talks to ease these Section 232 tariffs.

I guess what are you hearing on the ground regarding sort of the likelihood of this going through, what people are saying, and yeah, what's the talk on the ground regarding these discussions?

Johnny Sjöström

I think the market, everyone is convinced that the tariffs between Canada and United States is not going to hold for a longer period of time, but we don't think that there's going to be any agreement within this year. If there's going to be an agreement, it's probably going to be next year.

That's the talk on the town. Then again, if we look at the plate market, the demand is so high now locally, and even if, let's say, Algoma would start shipping into United States, it would not have a big impact on the pricing.

That's according to our estimates. They still need to import material from outside North America to fulfill the demand that we see right now.

Adrian Gilani

That's very clear. I guess that was my two, thank you.

Operator

Thank you. We will now take the next question from the line of Alain Gabriel from Morgan Stanley.

Please go ahead.

Alain Gabriel

Yes, sir. Good morning, Johnny.

Good morning, team. A couple of questions as well.

I'll ask them one at a time. The first one is on Oxelösund.

You are adding 100 kt of advanced high-strength steel capacity, which will come on stream at some point next year. Presumably this capacity or these volumes are higher margin products as compared to your current output.

Can you help us think about the EBITDA bridge or upside to the earnings as your mix improves at Oxelösund? Maybe we can take the Q3 run rate as a baseline, and if we hold everything on spot, any guidance on that would be much appreciated.

That's my first question.

Johnny Sjöström

Thank you for asking regarding our new quenching line in Oxelösund, and that investment will take more than three years to be up and running, it's not going to be any additional capacity for next year.

Per Hillström

No, Alain, I think you think about the Mobile investment we are running at the moment that will start up Q2 next year.

Alain Gabriel

That's

Per Hillström

not the same magnitude in terms of capacity. It's more maybe product mix.

Johnny Sjöström

Exactly. We're extending the quenching line number six that we have in Mobile, and that's going to be able to take more capacity, but also we're doing a tempering loop.

That means we're doing a tempering furnace, and that tempering furnace, most of our advanced high-strength steel grades needs to be tempered as well. We have been using the quenching line for tempering, and now with a new tempering furnace, we will relieve some of the quenching capacity.

That will happen in Mobile. We have been able to increase the capacity in Mobile.

Can I say the exact numbers? From 280,000 tons, now we're getting closer to 330, 340,000 tons.

That's an increase of 50, 60,000 tons. That's what we have as an increase for next year.

Now the quenching line in Oxelösund, that will take three years. That investment also have the potential to reach another 300,000 tons, but initial what we have communicated is 100,000 tons because we will be using that furnace as well for tempering.

It's designed for being able to quench more than 300,000 tons, but that's more of a future project. Then to your question, what kind of financial impact this is going to have, I think it's a little bit too early to say because it's a few years away.

I also want to highlight that this investment is also approved to be able to supply and support the defense industry in Europe, where the demand is going to be significantly higher in three years' time than it is today. There's a surprisingly long delay from when there's an order placed on, let's say, a military vehicle until we actually supply the steel.

It takes several years actually, now we see an increased order intake, but it's not near as we believe it's going to be, let's say, in three years from now when we have that quenching line up and running. Those orders typically comes at good margins.

Alain Gabriel

Thank you. Yes, I was referring to Oxelösund.

Apologies. It's not one, but three years ramp-up.

My second question is on the capex. You have deferred quite a big chunk of capex out of '26 into '27.

Does this mean your budget for '27 will go up, or is it fair to assume a similar deferral of magnitude out of '27 into '28? I'm trying to get a sense if this is going to be additive to your '27 or we would have the same mechanism in '27 as well.

Thank you.

Leena Craelius

Yes, thank you. This is purely a timing issue, and at this stage, you can move this 2 billion to next year, but of course we will get back to more detailed guidance during Q4 when it concerns next year.

At this stage, it moves between years.

Alain Gabriel

Understood. Thank you very much.

Operator

Thank you. We will now take the next question from the line of Tristan Gresser from BNP Paribas.

Please go ahead.

Tristan Gresser

Yes, hi. Thank you for taking my questions.

First one is on the Q4 guidance. You guide for somewhat higher prices across all divisions and also higher costs.

Can you tell us if you expect actually margins to improve in Europe, Special Steel, Americas? Would you expect Q4 to mark the peak of operational quarterly performance for the year?

That's my first question.

Leena Craelius

We don't guide the margins, first of all. Of course, the uncertainty, the Q4 is always a bit difficult to predict because it is the year-end quarter.

We continue to have the maintenance outages, of course. The production performance is in focus, that we succeed in that.

We have sold majority of the order book in Q4, we are quite certain about the price development during that quarter. Then the cost, like Johnny said, some of that cost we know and foresee that will remain stable or slightly increase, it is a combination of all this.

As said, we don't guide for the margins as such.

Tristan Gresser

The cost outlook across divisions, if raw material is somewhat higher, that's the same kind of magnitude than for price, so that 0% to 5%, and then you flag additional costs to that, is that correct?

Leena Craelius

I don't sort of flag for more additional costs as such for Q3, but somewhat higher as

Johnny Sjöström

No, and Tristan, as you can see in the outlook statement, we expect freight and all those costs to remain on a high level, we are not speaking about any significant delta on that account, but raw materials, as Leena showed, is moving up if we have Q3 as the base. Yeah.

Tristan Gresser

The pellet is included? The pellet premium is included in the raw material.

Leena Craelius

Yes, premium goes up quarter-on-quarter.

Tristan Gresser

Yeah. That's clear.

Just on the European supply-demand outlook, I think you mentioned inventory is normal, you think that that overhang is behind us, and why would you explain steel prices not moving higher, faster, given the plunge in imports? You mentioned 10 million ton of capacity restarts.

I'm struggling a bit to see that. I'm seeing the three blast furnaces from ArcelorMittal, but HKM has lost one furnace, Ilva is about to shut down.

Can you help me understand a bit why do you think that we'll have enough capacity restart to fulfill the plunge in imports? That would be great.

Thank you.

Johnny Sjöström

I think you're right that there are start-up problems, and Ilva is another question mark, what's going to happen to that and so on. There are idle capacity coming back online that's going to give additional capacity.

Then you're absolutely right, the question mark is, kind of what start-up problem issues do they have and what kind of capacity will be closed down and not be utilized. We've also seen political influence on steel production, where governments have taken a bigger initiative to support in the steel industry.

Ilva since past, that the Italian government has stepped in and supported. What's going to happen to Ilva, it's not a simple answer to give if they're going to close down or not.

My guess is or maybe that they're not going to close down, but it's remaining to be seen. Then we have also the Eastern Europe countries where also the governments are stepping in and supporting.

Here we see some other smaller mills with idle capacity starting up again. We know that they have starting up problems.

It's not easy. I think that my number was more theoretical, but it's a fact that we have some idle capacity coming back online, mitigating some of the supply and demand gap.

That's primarily on the strip side. Hence, I'm not as maybe so optimistic when it comes to price increases on the strip as I used to be because of this additional capacity.

Then again, as I've been saying, on the plate market, we believe that there is a shortage already. We see it already when it comes to steel structure that goes into data centers, and also piles, steel piles that goes into a lot of construction work, that there's a lack of capacity forcing companies to look outside Europe to get the availability that they need.

That will, for sure, drive up the prices. A little bit hard to predict.

I'm a little bit more cautious when it comes to price increases on strip than I am on plate.

Tristan Gresser

All right. Thank you.

Operator

Thank you. We will now take the next question from the line of Boris Bourdet from Kepler Cheuvreux.

Please go ahead.

Boris Bourdet

Hi. Good morning.

Thank you for taking my questions. The two questions, the first maybe with the other segment.

I remember that you guide for something around 1.4 billion negative contribution for the year at the EBIT level. The run rate is well above that level, do you stick to that guidance of 1.4 per year including 2026, or should we shoot at a lower level?

That's the first question.

Leena Craelius

I think we will stick to the guidance that we have given.

Boris Bourdet

That would mean a big catch-up in Q4, like 0.6 billion in Q4. What would be the reason for that?

Leena Craelius

Year-end, we need to see how all the costs develop. Of course, the programs continue, IT-related programs.

During Q3, of course, the IT activities related to this project was lower. We had the summer break taking place.

Now we have more activities during Q4. This of course remains still to be seen how the costs will develop.

Boris Bourdet

Okay. Thank you.

The second question is on Luleå. Johnny, you you mentioned in the introductory remarks that the project is running according to budgets and and timing, but you also hinted at some structurally potential challenges coming with big projects.

Where do you see the main risks, and is there any specific specific early signs of of coming challenges there?

Johnny Sjöström

We're in the beginning of an extremely large project, and there are a lot of regulatory factors impacting the progress of that investment. We've learned from Oxelösund that the power line was delayed because of an appeal to the Environmental Court, and that came at the end of that investment.

We were not able to foresee it. We were not able to forecast it.

This is the sort of regulatory environment we have in Sweden. Maybe for other countries, it's hard to understand, but that's the way it is.

We are very much dependent on regulatory approvals for a lot of things that we do and a lot of things that we are planning to do. Hence, the reason, based on experience from Oxelösund, we're highlighting the regulatory risks that we have with this large project.

Boris Bourdet

Okay. That's clear.

Thank you very much.

Operator

Thank you. We will now take the next question from the line of Bastian Synagowitz from Deutsche Bank.

Please go ahead. Oh,

Bastian Synagowitz

yeah. Hey, good morning, all.

Thanks for taking my questions. I actually only have a quick one left on the EAF ramp-up in Oxelösund, which is not too far away, I guess second quarter next year.

Just wondering, have you refreshed numbers here on how the costs will look like in the current environment compared to your existing blast furnace operation as that new EAF is ramping up? Then also, how long do you expect to take until you're being fully ramped up and will also have the full, or I'd say most of the product spectrum available there?

Leena Craelius

For the cost side, of course there will be some additional costs always with the ramp-up. As it's more like a trial period, not optimal energy efficiency and production efficiency from the beginning.

Of course, the net working capital, we have started to sort of revise and plan that there will be some higher scrap inventory while we still continue with the blast furnace, those we need to take into account during next year. Of course, we will get more into details during Q4 when we have more sort of calculations ready.

Maybe Johnny can then comment on the timing.

Johnny Sjöström

For the time frame, we're planning for six to nine months sort of double production and ramp-up. That's sort of the plan we have right now.

Bastian Synagowitz

Johnny, that's obviously, I would say, by industry standards a pretty ambitious plan. I think we've been seeing some of the peers which were probably aiming for similar, say, 12 months, and it took them at least 24, and they're not fully up and running operationally.

Then there's the product spectrum question. Do you think that that is realistic for your product spectrum, or why do you think you'll be doing better than those?

Is it an easier ramp-up process in terms of the product specifics?

Johnny Sjöström

Your conclusions are right. Normally, it takes longer.

Then again, we're just replacing a blast furnace with an electric arc furnace. The rest of the production is actually exactly the same, which means that if the chemistry from the electric arc furnace is right, then everything should be the same, so that shouldn't be any changes.

We have been training our staff in Mobile to run an electric arc furnace, and we will have staff from Mobile coming over to start up the production. Unless we run into any start-up problems with the equipment as such, I don't think that the qualification period should be longer than six to nine months.

We don't have too many customer qualifications that we do. It's the products that we produce don't have those specific customer standards or specifications.

It's actually our own specification and our own quality guarantees, and that makes it a lot more simple. If it would be the grades and material that we sell to automotive industry, then you're absolutely right, then it takes 24 months and it's rigorous testing and evaluation that needs to be done.

In this case, it's more simple.

Bastian Synagowitz

Okay. Thanks.

Thanks for this.

Operator

Thank you. We will now take the next question from the line of Andrew Jones from UBS.

Please go ahead.

Andrew Jones

Hi, Johnny and Leena. Thanks for the color.

Just wanted to get a bit more detail on energy costs, sensitivities, and things like that. In terms of the actual 2Q head as a 3Q headwind versus 2Q, could you just quantify how much energy, power and gas and so forth, added to your cost base?

Maybe is there a rule of thumb you could give us in terms of sensitivity to the power price in Sweden, or the price on TTF? Just any sort of color around that to help us for Q would be helpful.

Thanks.

Leena Craelius

How we interpret this sort of cost category when it comes to energy, we are then not talking about coking coal or CO2 emission allowances as such, but we are talking about oil and gas and electricity. We can see that, of course, the natural gas prices have developed upwards, but in the big portion of this raw material impact on our profitability, it is still minor.

It's less than 10% increase or in relative terms. It has gone up for sure, and I think that the biggest impact is in Europe division, definitely, while Americas and Special Steels, when it comes to gas prices, is less.

From the cost elements that have developing upwards during this year, I would say that the CO2 emission allowance cost is definitely the biggest that you need to take into consideration. Also alloys and the logistic cost is much, much higher.

Andrew Jones

Okay. Could you just put any numbers around, in Europe, how much was your sort of total excluding coking coal, your energy bill in the third quarter?

Leena Craelius

Sorry, unfortunately, I don't have that figure in my head right now, I can't give the exact figure.

Andrew Jones

Okay. No worries.

Just sort of second question on the market. Johnny sounds quite less bullish maybe than some on sort of pricing outlook on strip.

Is there any particular customer segments or areas where you're seeing weakness on the demand side that might be informing that sort of, [laughs] relative caution? I guess I kind of echo what Tristan was saying about it seems like the market situation on the supply side is tighter than you're implying with this sort of 10 million ton restart idea.

On that demand sort of super soft, would prices not continue to move up pretty materially into the start of next year? Now

Johnny Sjöström

I think the difference between Europe and United States is that USA, we have a strong underlying demand. In Europe, we don't really see the strong underlying demand.

When it comes to steel consumption, it is within construction, which is the largest segment for consuming steel, and then we have automotive. Both of these segments are down on low levels.

If there would be any change in any of two of these segments, of course the demand would go up and then the situation would change. I don't really see that to happen, at least not in the beginning of or first half year next year.

Then I was more optimistic when it comes to supply situation before than I am now. That's based on theoretical calculation on capacity coming online.

Then again, I think one of the previous questions we got, it depends on what happens to a few of these mills and how successful they are. That's also remaining to be seen, because if Ilva doesn't if it's closed down, let's say, that would be a game-changer, because it's a lot of capacity coming through that mill.

Then we also have Thyssen, etc. All other investments we're talking about, HKM and electric arc furnace and so on, that's going to take a few more years.

We will run on blast furnaces primarily during next year. Then a lot of the companies are trying to maximize their output to secure they get free allocations for the future.

That's what we've seen. It's a little bit changing the game a little bit, Andrew Jones (UBS):

Andrew Jones

Yeah. Fair enough.

Cool. Thank you.

Operator

Thank you. As a reminder, to ask a question, please press star one and one on your telephone.

We will now take the next question from the line of Maxime Kogge from ODDO BHF. Please go ahead.

Maxime Kogge

Good morning, team. I have a first question is on US plate pricing, because it seems at this level the current spot level, which is extremely high, there's a big incentive for imports to flow into the US.

If you look at where Chinese or South Korean plate prices sit, if you add 50%, it seems it's still interesting for them to land in the US. Do you expect that this big arbitrage window that we have right now on the US plate market be closed anytime soon, or can it be sustained yeah, for some time?

Now

Johnny Sjöström

what we see is on the market that customers are extremely concerned about the availability. I don't see that the market has restocked or replenished their inventories, and they haven't been able to because there's not enough capacity within the country.

Recently we've seen that imports have starting to increase. It's been mainly from South Korea.

Prices are on a level where it's starting to be interesting to look at imports. We don't believe that prices will go down, but then immediately we will see less imports coming in.

I think that rather that the prices will stabilize on a higher level and that it's very likely that we're going to see more imports coming in to supplement the shortage on the market. Then we also have to remember that there is still anti-dumping duties on countries like China, etc., Yeah, we're not going to see any Chinese material coming into the country.

It's likely that we're going to see more material from Canada, likely we're going to see more material from South Korea, and also some material from Europe. That's more likely, now.

Maxime Kogge

No, interesting. Second question is on EU regulation, because CBAM and the new tariff-rate quota system have been very powerful and effective, but there are still talks around extending CBAM to downstream processes, introducing melted and poured, as slabs are not yet really incorporated in the TRQ system, so that's a loophole.

Where are the areas that you think should deserve attention from the regulators and need to be improved further to really make the market watertight, not going as far as the US perhaps, but still having a strong system?

Johnny Sjöström

This will be more my personal reflections on your question, then I think it's absolutely critical that we include the slabs into the tariffs, that melted and poured is included. Otherwise, Europe will be just a re-rolling country, clearly.

That is a must, and it's also very likely that that will happen. Those discussions are ongoing as we speak.

Then we talk about derivatives. Products produced out of steel.

I think also this is important, because if that is not included, then production will move out from Europe, then it will be a deindustrialization situation, and no one really wants that. I think that we're going to follow what USA have done.

That is my prediction at least.

Maxime Kogge

That's clear. Perhaps last one as I'm perhaps the last in the queue.

It's about the auto contracts. What's your first views, because a lot of them will be renegotiated in the coming weeks.

At the same time, the market remains quite weak in Europe, how do you balance, in your negotiations, the very strong spot prices against the subdued volume trades and also price trends for autos in Europe?

Johnny Sjöström

Now we have been negotiating Q1, and we've been doing that for quite some time. I think that we're close to most of the Q1 contracts already.

We already see that we have price increases for Q1. That the market is accepting a price increase, which is clear.

Then again, then what's going to happen around that corner, it's hard to see and hard to predict now, and this is mainly related to strip. Did I answer your question?

I don't No,

Maxime Kogge

no, that's clear enough, yeah.

Johnny Sjöström

Thank you.

Operator

Thank you. We will now take the next question from the line of Krishan Agarwal from Citigroup.

Please go ahead.

Krishan Agarwal

Hi. Thanks a lot for taking my question.

Most of them have been answered, and I have a last one pending. The carbon cost in the quarter was slightly higher than what we expected, and is there any way you can help us in terms of how should we look at the carbon cost for the full year and, more importantly, for next year, given that Oxelösund EAF will come on stream and then, in theory, that should lower your carbon cost?

Just looking for some kind of a pointers on this for this year and the next year.

Leena Craelius

As I mentioned, the cost related to CO2 emission allowances has been now increasing for this year significantly. We see 1.4 billion higher costs compared to last year.

Now this year, there has been combination of issues impacting the cost. Of course, the free allocations are lower, and they will also be lower for next year.

Then the reference point for free allocation, our production volumes in the reference period has been low. Now they are higher, we will benefit from higher production, so that will partially compensate for the sort of the lower free allocations.

Then also, as you mentioned, Oxelösund EAF will be going live next year, we are reducing, hopefully, the blast furnace production, and that will have a positive impact. Then the issue is that how the emission allowance price will behave.

We have some of the trades for next year planned are fixed, but then the remaining part is uncertain how the price will develop. At this stage, I would give a guidance that it's fairly similar to this year level, plus/minus something, but it's really hard to predict at this stage.

Krishan Agarwal

Understand that. Then just a quick clarification.

You mentioned the reference point is higher, allocation will improve, for example, in 2027. Then once you switch from blast furnace to EAF, does that production level continue to be the reference point, or because the blast furnace is going down and hence your reference point for free allocation also goes down, that means allocation in '28 or '29 goes down significantly?

Leena Craelius

To be completely honest, we are still uncertain how the free allocation will be treated when we are closing the blast furnace in Oxelösund, because it might be that we still keep it mothballed for, for example, defense need purposes, we are still looking into this, I don't have, unfortunately, answer to you at this stage.

Krishan Agarwal

No problem. Okay.

Thanks a lot.

Operator

Thank you. There are no further questions at this time.

I would like to hand back over to the speakers for closing remarks.

Per Hillström

Thank you, Johnny. Thank you, Leena.

Then we can conclude today's conference. If you have anything further, you are much welcome to contact Investor Relations.

By that, we wish you a nice day.

Leena Craelius

Thank you.

Johnny Sjöström

Thank you.